3 position safety and custom actions

[wildbillb02]

Ok. Dumb question, finally to the point I want to try a custom build. I have always liked the 3 position safety on my factory rifles.

So in looking to go custom, is it a function of the action and bolt to go with the safety? Like will only certain actions and trigger combos give me that option?

Thanks

 

[fseaman]

will only certain actions and trigger combos give me that option?

Some manufacturers come that way.
Some you can add it.

It depends on what you are going to start with for a custom.

Example 1: Mauser 98 and Remington 700 action (not a clone) Gentry makes a new back end of the bolt that is 3 *** like you would expect.
Example 2: Weatherby Mark V, AFAIK, can't, safety on the bolt, locks the handle.
Example 3: Savage, some come with a 3 ***, others can get a Jard.
Example 4: Custom/Builder actions on the R700 foot print. Trigger safety may not lock the bolt. May have a bolt release separate from the trigger. So...?

and there are more combinations that I never tried. Sako, I never checked mine. Tikka, it was my buddies so don't know.

 

[nwmnbowhunter]

Defiance is offering it on their rebel action... be hard to beat it

 

[fseaman]

Defiance is offering it on their rebel action... be hard to beat it

Can you buy it or does it have to be from an authorized builder in a custom?

I ask because I can't find it "retail".

 

[fseaman]

Found it.

It uses the Gentry conversion.

Defiance rebel bolt must be "same" as a R700.

 

[MagnumManiac]

Yes, Gentry make quite a few aftermarket 3 position safeties, for REM 700, Mauser'98, and a host of actions that can run a REM 700 style cocking piece.
It must be understood these are NOT drop in parts, they require gunsmithing alterations and fitment.

Cheers.

 

[adk hunter]

I called Gentry once, was going to see a friend literally next door. I thought wow how cool. I hope the gentleman was having the worst day of his life and pray everyday since has been better.... I wish he never answered my call.

 

[Peddler 76]

My LAW Professional model has the Ed Brown 704 action and a 3 position safety. Not sure who has the rights to that action now.

 

[jrkotz]

I wish there were more options for 3 position safety, it just seems like a superior design. Many times walking through tight woods I've glanced down to see my 700 pattern bolt dangling in the open position, giving me the sad realization and one of my meticulously hand loaded cartridges was ejected along the way.

Winchester 70 pattern actions are 3 position, which includes kimber rifles. I've owned a few that I liked.

 

[1raggedhole]

Ed LaPour made 3-*** for different rifles. I have one on a Springfield. Don't know whether he still does, or not.

 

[D-mon]

Pacific tool and gauge makes one as well and hs precision action have one as well I think

 

[1raggedhole]

I called Gentry once, was going to see a friend literally next door. I thought wow how cool. I hope the gentleman was having the worst day of his life and pray everyday since has been better.... I wish he never answered my call.

I dropped into their operation a while ago to purchase some scope bases and rings. Dave, Dennis, and I even think the Mrs. were there. Dave was very cordial, showed me around, and it was a good experience. I remember the walls of the shop being covered with mauser actions. I guess he was having a very bad day when he picked up the phone.