victor3ranger
Well-Known Member
lol 
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
25-06 AI
- Thread starter victor3ranger
- Start date
Help Support Long Range Hunting Forum
billywreid
Active Member
I have a remington 700 25-06 AI. It took me a while to get the right load built up for it but it's 1 of my go to rifles now.
3800fps
Well-Known Member
- Joined
- Feb 15, 2012
- Messages
- 154
I've 50 years experience with the 2506 ā¦(in Nevada)
Any advantage with an AI version or fast twist barrels is minimal. It kills anything huntable in Nevada .
It's already at the edge of flat trajectoriesā¦and ethical kill distances.
What needs improvemen?ā¦brass life?ā¦270 win brass is plentiful and relatively cheap (and fits the chamber neck tighter to further improve accuracy.)
This cartridge has thrived and survived since 1925 simply because it performs so well on so many levels.
Any advantage with an AI version or fast twist barrels is minimal. It kills anything huntable in Nevada .
It's already at the edge of flat trajectoriesā¦and ethical kill distances.
What needs improvemen?ā¦brass life?ā¦270 win brass is plentiful and relatively cheap (and fits the chamber neck tighter to further improve accuracy.)
This cartridge has thrived and survived since 1925 simply because it performs so well on so many levels.
billglausier
Member
I have a Ruger #1 in 25-06. It shoots very well for me. Has a Jared trugger. I load a Sierra 117/120gr hpbt bullet behind 51 gr. Of IMR 4350. I Think. Only have a Zise 3x9 on it. Still shoots very good at 400yds
I have asked this before, what exactly is a Jared trigger? Is it an adjustable trigger? Can it be changed out readily? I have a 1b that could use a trigger upgrade.
MagnumManiac
Well-Known Member
3800fps
Well-Known Member
- Joined
- Feb 15, 2012
- Messages
- 154
I believe billglausier meant JARD triggerā¦which are known for fine triggers especially benchrest/target style with pull weights in ounce measure ranges.
Thanks, I now have a direction for information research
3800fps
Well-Known Member
- Joined
- Feb 15, 2012
- Messages
- 154
Wellā¦my first 2506 had a CM Douglas premium air gauged barrelā¦it took about 1200 rounds for the 100yd accuracy to degrade from 0.3 inches to 0.5ā¦.even with my load testing and frequent avid coyote hunting it took 30 winters before I replaced the barrel with stainless because I got tired of pampering that CM barrel in the snowā¦(and I had way more money after the kids split.)
archeratlrg
Well-Known Member
I have a 1962 7mm Rem mag with original stainless barrel that has a shade over 7000 rounds through it but with careful handloads it will still shoot under an inch at a hundred. Nice thing about burning it out is I have two more identical barrels with less than 300 on each so I'm set with it till I croak.
victor3ranger
Well-Known Member
My original 7mag is almost that old. Is your barrel blued on non blued?
Mine the action is blued but the barrel isn't.
I call her ugly Betty
Mine the action is blued but the barrel isn't.
I call her ugly Betty
archeratlrg
Well-Known Member
Thos old originals had a form of blue, much of which is worn off on mine. I had my barrel and action ceracoted a few years ago. Looks much better nowMy original 7mag is almost that old. Is your barrel blued on non blued?
Mine the action is blued but the barrel isn't.
I call her ugly Betty
victor3ranger
Well-Known Member
I took ugly Betty to the gunsmith and he is putting a new barrel and trigger on her
