Capt RB
Well-Known Member
- Joined
- Dec 1, 2014
- Messages
- 1,994
Got out today cold and started snowing late. Had 2 typical and a bit better and one problem child the good kids first.
760 1.75x4.5 bushy elite 180 coreloc factory 4shots as that is the mag capacity
For some reason I will never know my wonderful wife decided that the red cleaning rod on my bench would be great to hang her delicates off. I got to the range on the way to Mom's and couldn't patch out my bores today. I shot them wet but I think I better start dong that lol Didn't measure it it's 4 shots the cold bore is high left
Second is my 308 Cold bore was high right then I shot the 9 left into the group. It was 7 degrees and I would normally have had a charge .3 higher but I left that box on the bench and took the box with the 50 empty cases instead.
Lapua 2x fired CCI 200's 43.3 Rl 15 168 smk 2.820 2640 @ 40 degrees is .3 lower this should be 2600ish~ with 43.6 in that 2640ish in this kind of temp in my rifle. Too cold to fool around with the MS.
Lastly is my 270 Today I took it out and left it on the other bench while I shot the other two here and out to 700 and 400 with the pump gun. My 308 was on my dope out to 650 then I had to add a .1 elevation to center up the steel.
2 weeks ago I decided to let this guy coat my rifle. Well I had talley scope mounts (aluminum) on the gun. The idot used a chemical that ruined the mounts. Since it was me that did this I had no recourse but to put the burris signature rings back on the gun. I would rarely have issues with them. But in certain conditions you must be aware of this issue. I fixed it after thinking about it but can anyone guess what happened???
First group is from before I coated this rifle and is common for it
Stock 270win Weatherby vangard with a Timney set at 22oz. Very nice break on the trigger. MDT LSS XL II Odin gunworks stock with mdt folder and XLR cheek peice. V Tac sling atlas 10 I think. Bag rider is not installed forgot it at home. HST 4x16
Hornady brass 2x fired 61.5 Rl26 9.5m 130sst 3139fps 3.320(long coal)
760 1.75x4.5 bushy elite 180 coreloc factory 4shots as that is the mag capacity
For some reason I will never know my wonderful wife decided that the red cleaning rod on my bench would be great to hang her delicates off. I got to the range on the way to Mom's and couldn't patch out my bores today. I shot them wet but I think I better start dong that lol Didn't measure it it's 4 shots the cold bore is high left
Second is my 308 Cold bore was high right then I shot the 9 left into the group. It was 7 degrees and I would normally have had a charge .3 higher but I left that box on the bench and took the box with the 50 empty cases instead.
Lapua 2x fired CCI 200's 43.3 Rl 15 168 smk 2.820 2640 @ 40 degrees is .3 lower this should be 2600ish~ with 43.6 in that 2640ish in this kind of temp in my rifle. Too cold to fool around with the MS.
Lastly is my 270 Today I took it out and left it on the other bench while I shot the other two here and out to 700 and 400 with the pump gun. My 308 was on my dope out to 650 then I had to add a .1 elevation to center up the steel.
2 weeks ago I decided to let this guy coat my rifle. Well I had talley scope mounts (aluminum) on the gun. The idot used a chemical that ruined the mounts. Since it was me that did this I had no recourse but to put the burris signature rings back on the gun. I would rarely have issues with them. But in certain conditions you must be aware of this issue. I fixed it after thinking about it but can anyone guess what happened???
First group is from before I coated this rifle and is common for it
Stock 270win Weatherby vangard with a Timney set at 22oz. Very nice break on the trigger. MDT LSS XL II Odin gunworks stock with mdt folder and XLR cheek peice. V Tac sling atlas 10 I think. Bag rider is not installed forgot it at home. HST 4x16
Hornady brass 2x fired 61.5 Rl26 9.5m 130sst 3139fps 3.320(long coal)
Attachments
Last edited: