Thunderbeast DT to CB conversion

jbur13 · Monday at 11:52 AM

I have an ultra 7 with direct thread mount. Has anyone done the conversion to CB, and added the CB Brake to additional rifles?
My question is, does the CB mitigate any more recoil than the standard direct thread model? My largest caliber is a 300 RUM and it still sucks shooting it with the DT ultra 7.
Thanks!

WeiserBucks · Monday at 12:02 PM

They're exactly the same. DT simply has a CB mount epoxied into it.

jbur13 · Monday at 12:06 PM

WeiserBucks said:
They're exactly the same. DT simply has a CB mount epoxied into it.

Right. I see how it is mounted, very easy conversion.
I was wondering if you feel any more recoil mitigation using the CB vs. DT?

WeiserBucks · Monday at 12:07 PM

jbur13 said:
I was wondering if you feel any more recoil mitigation using the CB vs. DT?

I don't know how else to tell you they're exactly the same, except to tell you again that they're exactly the same.

jbur13 · Monday at 12:21 PM

WeiserBucks said:
I don't know how else to tell you they're exactly the same, except to tell you again that they're exactly the same.

Thank you, just checking if that's what you meant by that. thanks for the reply.

waspocrew · Monday at 1:14 PM

The brake does nothing to help with recoil once the can is mounted. It's viewed more as a mounting option to use the suppressor on different rifles. Again though, you can do the same with a direct thread - just screw it on any rifle with the correct thread pitch.

PopNFresh · Monday at 1:27 PM

that rum would probably need an RR model to really get any more recoil reduction. if you need the fillings in your teeth removed or just hate everyone you shoot with a big brake like the 419 sidewinder Magnum would make a bigger difference

jbur13 · Monday at 1:39 PM

thanks popnfresh-
I just learned of the RR model and grabbed this off TB website: Going to check them out!

Could be exactly what I'm looking for. I'll see if I can find some testing videos on it!

HuntingBronco · Tuesday at 8:17 AM

In case you have not done it already, check availability and cost of CB mounts before you put yourself in a position of buying more of them. Might change your mind.

jbur13 · Tuesday at 9:17 AM

HuntingBronco said:
In case you have not done it already, check availability and cost of CB mounts before you put yourself in a position of buying more of them. Might change your mind.

I'm not going to do the conversion after all.
I'm going the route of the RR model for this particular rifle. Thanks for the input!

Dirtrax · Tuesday at 6:42 PM

HuntingBronco said:
In case you have not done it already, check availability and cost of CB mounts before you put yourself in a position of buying more of them. Might change your mind.

Not if you have several barrels threaded in different pitches, $129 is much cheaper than a new can.

PopNFresh · Tuesday at 6:56 PM

and with their facemount you can put your can on a barrel that is too thin to otherwise get a shoulder on to suppress

HuntingBronco · Tuesday at 7:01 PM

PopNFresh said:
and with their facemount you can put your can on a barrel that is too thin to otherwise get a shoulder on to suppress

This is what they did on my WBee with the ultralight barrel. Works great.

HuntingBronco · Tuesday at 7:02 PM

And I'll just drop this here if you don't like the $129 or can't find the TBAC original.

Hansohn TBAC CB Direct Thread Adapter – Hansohn Brothers

hansohnbrothers.com

Thunderbeast DT to CB conversion

jbur13

Well-Known Member

WeiserBucks

Well-Known Member

jbur13

Well-Known Member

WeiserBucks

Well-Known Member

jbur13

Well-Known Member

waspocrew

Well-Known Member

PopNFresh

Well-Known Member

jbur13

Well-Known Member

HuntingBronco

Well-Known Member

jbur13

Well-Known Member

Dirtrax

Well-Known Member

PopNFresh

Well-Known Member

HuntingBronco

Well-Known Member

HuntingBronco

Well-Known Member

Hansohn TBAC CB Direct Thread Adapter – Hansohn Brothers

Similar threads

Recent Posts