-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Scope rings
- Thread starter hammer111
- Start date
Help Support Long Range Hunting Forum
PopNFresh
Well-Known Member
their penny method will tell you quick
go to the height option
americanrifle.odoo.com
go to the height option
M-BRACE SCOPE RINGS
Do it right the first time; use a 34MM. You could probably lap it, but why go through the trouble? 28MM is for the 1-inch tube.
Last edited:
PopNFresh
Well-Known Member
I thought he was referring to height not diameter
hammer111
Well-Known Member
- Joined
- Dec 14, 2013
- Messages
- 498
My apologies yes it's 34 mm tube. I'm wondering if 28mm height rings will give me enough clearance
What ring brand you have that shows 28 MM (1.00") height?
When in doubt, contact Arken directly for recommendation.
The 34mm diameter, .92 low rings should work fine.
Stephen Prindle
Active Member
PopNFresh
Well-Known Member
That's exactly what I was leading to, but I don't know what ring the OP has, so I provided the picture as a reference. Some brands might also measure height differently. Below is an Arken SH 34MM 4-16x50 with a low ring and 20 MOA rail. He might want to consider extra low rings.
Last edited:
Yup but he may run into an issue with the bolt handle hitting his eye piece objective with extra low. Only one way to find out!!
Another factor we do not know is precisely what his setup is—too many uncertainties.
Hand Skills
Well-Known Member
Not all rails are the same height either...
