OG-danimal
Well-Known Member
What speed were you getting with the 172's?
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
7SS Build
- Thread starter 806 guns
- Start date
Help Support Long Range Hunting Forum
Ran into my first issue today. Loaded ammo won't chamber in my rifle.
Took the 30 degree brass i have and ran it threw the die to size the neck correctly.
168gr smk have to be seated at 2.800" to chamber in my rifle. It's the 110 freebore which is short than most i believe.
Took the 30 degree brass i have and ran it threw the die to size the neck correctly.
168gr smk have to be seated at 2.800" to chamber in my rifle. It's the 110 freebore which is short than most i believe.
What is engaging? Bullet? Shoulder? Or lower case body?
If your chamber is short, you may have to dismantle and bump brass.
If your chamber is short, you may have to dismantle and bump brass.
30 degree brass
4831sc
Pulled 168gr SMK
2840 fps
Shots at 100 yards
oal 2.800"
4831sc
Pulled 168gr SMK
2840 fps
Shots at 100 yards
oal 2.800"
Oal with fires case and loctite 168gr smk
2.869 with 168gr berger hunter
2.869 with 168gr berger hunter
ruby76
Well-Known Member
Did you load your fireformed brass and now that won't chamber? Trying to follow your last few posts.
Bought a barrel package that came with loaded brass for the rifle. Guess there is some slight variations in the origin actions causing this issue. Barrel passed the the go gauge test fine.
I will be pulling the loaded ammo. As I have 100 rounds to fireform and shot 168gr smk fine with the load above.
Anyone used this to add a touch more freebore to a barrel ?
I'm scared to! Though I could use some in mine also.
I need a oal modified case before I do mine so I know how much length I'm adding.
Do you need the correct bit and tap info?
