Gunsmith to install banded front sight

letzhunt · Nov 5, 2024

I'm looking for a gunsmith who can properly attach a banded (likely NECG) front sight on a .458 win mag that's had the barrel cut to 20". Close is better but anywhere that does good work. I'm in NE Indiana. I can have the barrel removed and just send it for the sight install with the barrel marked at top dead center.

Brathany · Nov 5, 2024

Do you have the sight?

letzhunt · Nov 5, 2024

Not yet? My rifle is at my riflesmith to get the barrel cut. He does great work but doesn't install that kind of front sight. I was planning on having him just reinstall the original sight ramp but I really prefer the banded style.

Brathany · Nov 5, 2024

The concern is the outside diameter of where the barrel is cut and the internal diameter of the sight.

letzhunt · Nov 5, 2024

Understood. I measured at the 20" where it will be cut but can't find where I wrote that down.. And it's at the Rifle smiths so I Cant check to see the measurement. don't even know if I will be able to find one large enough in diameter.

Brathany · Nov 5, 2024

When it gets back, measure and then call the sight company to see if it's feasible. Really a non banded sight would be much easier to mount. No diameter concerns.

Sergeant Stadanko · Nov 6, 2024

JRH Advanced Gunsmithing in Carson City, NV. (Jack Huntington) He does that type of work all the time. Awesome gunsmith.

letzhunt · Nov 6, 2024

thanks for that lead.

Wilderness Blacktail · Nov 6, 2024

Ive read a number of chapters/articles where they state that you take some measurements in the vicinity you want the sight, buy the band, slide it up tight, mark it and cut the barrel to that length. Then reinstall the sight n sweat it on. Or something along those lines.
It seems like any decent smith could do it?

letzhunt · Nov 6, 2024

I have done my own barrel band swivels with 120 epoxy (what they use to attach nose cones to rockets!) Thought I would ask about a smith though since bluing will be necessary also. First obstacle is if there is a band to be had that is large enough or with the thickness to make it work.

Wilderness Blacktail · Nov 6, 2024

I got ya. Dont lots of those rifles come with barrel band sights? Seems as though there would hafta be a couple at least close. Made in europe perhaps?

Lenny Foffa · Nov 6, 2024

I would suggest Griffin. And Howe here in NJ. They have an excellent gunsmith building and they build their Dangerous Game riflesWith a band front sight !

Lenny Foffa · Nov 6, 2024

They could also attach a barrel band for your sling and an island rear sight ! All machined to match the taper of your barrel , then have the entire barrel and all the new hardware blued at the same time ! It will look perfect !

letzhunt · Nov 6, 2024

I installed a different rear sight and it already has a barrel band. I will look into them though. Thanks

Gunsmith to install banded front sight

letzhunt

Well-Known Member

Brathany

Well-Known Member

letzhunt

Well-Known Member

Brathany

Well-Known Member

letzhunt

Well-Known Member

Brathany

Well-Known Member

Sergeant Stadanko

Well-Known Member

letzhunt

Well-Known Member

Wilderness Blacktail

Well-Known Member

letzhunt

Well-Known Member

Wilderness Blacktail

Well-Known Member

Lenny Foffa

Well-Known Member

Lenny Foffa

Well-Known Member

letzhunt

Well-Known Member

Similar threads

Recent Posts