• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Let’s talk sizing…..

nksmfamjp

nksmfamjp

Well-Known Member
Joined
Jan 5, 2004
Messages
3,471
For best consistency of CBTD, internal neck run out, and general case fit, what works best for you?

Redding type S full die

Redding body die + Lee collet neck die

Redding body die + Redding Type S neck die

Body die + bushing die + expander

Forster die with neck honed

Up to this point, my best results have been with a Forster FL die….0.0016" Max TIR, if I remember right. My Redding type S or Whidden setups are only 0.002" with the bushing clamped.
 
Based on my data??, I would go Forster for my next die set, but I'm wondering about people's experience with a body die and the Lee Collet die. It seems like a way to size the neck concentrically with the inside aligned to the primer hole.
 
nksmfamjp said:
Based on my data??, I would go Forster for my next die set, but I'm wondering about people's experience with a body die and the Lee Collet die. It seems like a way to size the neck concentrically with the inside aligned to the primer hole.
Click to expand...
I've had amazing results from some honed Forsters and some run of the mill results from others, but never bad results. I think overall, the Redding Body Die/Lee Collet Die combo give a little better results. I've been playing with a new .308 barrel lately, using the Redding Body/LCD combo and on most of my cartridges, runout at the bullet ogive is about .001" and never exceeds .002".

I have had generally good results from bushing dies but prefer either of the above to bushing dies because they size the entire case neck don't form donuts.

John
 
For my precision loadings, I use Forster honed neck FL BR dies with highly polished expanders sized to MY specs. I use their competition seating dies and Redding Body dies followed by a mandrel. I have also honed both RCBS (especially them) and Redding dies to suit my purposes, however, this is a lot of work. I also NEVER use a standard as they come expander, mine are all sized and polished for what I want.
I will never go back to bushing dies, they just aren't as good as many make them out to be. How a floating bushing is better than a fixed neck in a die has never proven to me it is…donuts…I got the most runout from bushing dies.

Cheers.
 
Mike D Texas said:
I don't worry about runout. I used to obsess over it, but found no appreciable difference in accuracy.

Neither did F Class John when he rested runout even to extreme amounts.
Click to expand...
Thanks for the explanation.


New question. Does Forster's chamfered neck bushing fix the "bushing misalignment causes neck runout" issue?
 

Similar threads

PRCLITE
Okay let’s hear it!
2
Replies
18
Views
1K
QuietTexan
QuietTexan
Zen Archery
Let’s Do The Math…
2
Replies
25
Views
2K
Carlos88
Carlos88
DoneNOut
Let’s see them reloading buddies!
Replies
0
Views
580
DoneNOut
DoneNOut
M
Lets talk primers
Replies
7
Views
2K
kaseyfied
kaseyfied
Remmy700
How about let’s see them Reloading Benches
7 8 9
Replies
118
Views
31K
Remmy700
Remmy700

Recent Posts

Top