Your Personal RESULTS with custom long range HUNTING rifles built buy a PROFESSIONAL?

Allen Kitts said:
I have two Gunwerks rifles and both shoot flawlessly. One shoots the 180 Hybrid and has worked great for me ever since I bought it. I have had this rifle for at least 10-12 years maybe even longer. I bought it as a complete shooting system, i.e. Rifle, Scope, Rangefinder and Ammo. I have since started loading my own ammo with the components Gunwerks told me they used for their factory ammo and the loads shoot great as well. Unbelievably confident while using this rifle, it just shoots great for me. The last one I purchased I just bought the rifle, added a scope and started working up a load for it. It took a bit but once I got the right combination it shot lights out. The rifle is a half MOA shooter all day long with my hand loads.

I just purchased a new rifle that is a McWhorters Custom in 300 PRC and have not had a chance to ring it out yet. My first trek to the range did produced a sub 1/2 MOA group with factory 212 ELD-X ammo. Once I start loading for it I hope I can reproduce those results with the handloads as I won't use the ELD-X for hunting.
Click to expand...
Life side tracked me for a while, but I need to get this rifle ordered. Curious what caliber are your Gunwerks? I'm still considering Flat Creek Rifles (McWhorter), GAP, and a couple others. Did you have Flat Creek or McWhorter build your 300 PRC, how's it shooting, and what scope did you decide on for it?
 
Last edited:
I used to have my target and LR rigs built by one 'smith, but when he retired, he was gracious enough to sell his equipment to me, I already had a mill and a lathe, but I am an Engine Reconditioner by trade and his gadgets were foreign to me.
Since then with his training I have built my own rifles to his same standards and could not be happier with the outcome.
I get consistent 1/4 MoA with all of them, some do .1's in limited shots of 40 rounds. I had a time buying 3 groove barrels cuz everyone was praising them to death…didn't work out for me, accuracy was bad, then I found the bullets were stripping in the bore.
Anyway, I bought an International Arms mil spec rifle, it only barely lived up to it's claims and was sent back, was replaced in full and now is an absolute tack driver, but I will never do it again when I can build them just as good, if not better…

Cheers.
 
RBros new address:

1708950846120.png
 
Alamo Precision IMO is the best. Many others mentioned seem to add $1000 just for their name.

I have owned McWhorter. VERY nice rifle but had difficult time matching their accuracy. It was their 6.5 Weatherby Magnum.
My GAP .308 never shot under an inch; it used a trued 700 action though.
Brown precision built my first custom in 1988 using a trued 700 action.
 
Highcountrybucks said:
Life side tracked me for a while, but I need to get this rifle ordered. Curious what caliber are your Gunwerks? I'm still considering Flat Creek Rifles (McWhorter), GAP, and a couple others. Did you have Flat Creek or McWhorter build your 300 PRC, how's it shooting, and what scope did you decide on for it?
Click to expand...
My McWhorter 45XML is a hammer. Couldnt be more impressed od it's build quality or accuracy. It literally shoots better than me
 

Attachments

  • Screenshot_20240205_104110_Gallery.jpg
    Screenshot_20240205_104110_Gallery.jpg
    77.5 KB · Views: 56
  • Screenshot_20240205_104026_Gallery.jpg
    Screenshot_20240205_104026_Gallery.jpg
    84.1 KB · Views: 56
Hoss50 said:
Mine isn't as cool or custom as others, but I like it.
Weatherby Vanguard Action
Oregon Mountain Rifles CF Faster Twist Barrel and Brake
Bell and Carlson Stock
Stock was fitted and bedded by Axisworks
Timney Trigger
Burris Veracity 3x15 scope with Seekins Rings and EGW Rail

It shoots well. I developed a load with 128gr Hammer Hunters. This is 3 shots at 500 Yards. Copper strikes are the Hammers. The lead strikes are the same gun with 135gr Berger, the Berger load is not developed yet, that was a test load. The rifle tends to put 2 shots almost touching, then the 3rd moves a little.
Click to expand...
Love my OMRCarbon barrel
 
wasskeet said:
Seen no complaints at all on his builds.
Click to expand...
Have GAP, Hill Country and the holy grail, D'Arcy Echols. Waiting on a 300wm from D'Arcy, hope to get it before the 2025 season. I just ordered up a 300PRC from Dallas at Lane Precision today, can't wait, reasonable price too. I have rifle OCD, so says my wife.
 
colohunter said:
Have GAP, Hill Country and the holy grail, D'Arcy Echols. Waiting on a 300wm from D'Arcy, hope to get it before the 2025 season. I just ordered up a 300PRC from Dallas at Lane Precision today, can't wait, reasonable price too. I have rifle OCD, so says my wife.
Click to expand...
I have the same OCD.



I'm single.


imagine that
 
Just because you're not well known smith or company doesn't mean you cannot build a great rifle on your own. I've built dozens and worked up the load before giving the rifle to a family member or a very close friend. Some take their shooting serious, other are happy with whatever brand of bullets they buy, but nothing comes out of my shop more than 3/4", most are 1/2" or better. I tend to know who I'm giving it to and if they're they type to shoot anything and the gun is finicky they might get a 3/4" rifle.
But with a little practice and good hardware you too can build great rifles.
 

Similar threads

Len Backus
Your long range hunting story
Replies
0
Views
3K
Len Backus
Len Backus
D
Custom Long Range rifles
2
Replies
19
Views
7K
zfastmalibu
Z
matt_3479
Your long range hunting or target shooting rifle?
Replies
4
Views
5K
silvertip-co
S
WYOHTF
Long range custom air rifles ?
Replies
9
Views
2K
codyadams
codyadams
bultinkle
  • Poll
What does your long range hunting rifle weigh?
7 8 9
Replies
114
Views
9K
Highcountrybucks
H

Recent Posts

Top