I dont like zeroing off a sled. The gun doesn't recoil or react the same as shooting off a rest or bipod. I'm not saying this is the issue but it could cause your zero to be different. I would get some sandbags and shoot off that. You don't need a sled for a 308.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
HELP... Shots dropping off more than expected. Remington 700 .308 Hunting Rifle
- Thread starter BHINES1216
- Start date
Help Support Long Range Hunting Forum
BHINES1216
Active Member
Ugh. I just took a look at the scope and found this.
Attachments
Add proper scope mounting to the problem/solution. In this case, the loose ring clamps probably saved your scope from the weighted led sled use.
You need to remount the scope with proper torques on base, and rings. Ditch the led sled and rezero off a bipod, sandbags, front rest...
I still recommend a 6inch MPBR zero for your scope choice. Should give you a dead on hold out to 300yds without worrying about holdover. You could see if you get lucky using your reticles subtensions but that takes time and ammo to evaluate and your hunt is less than a month away, most times those subtensions do not perfectly match factory ammo trajectories.
The Oregonian
Well-Known Member
I think until his rifle gets squared away worrying about zero distance just adds more complexity and doesn't solve the original problem.
Yep, esp. using too much counterweight, and the weakest link will be the first to go. In this case, it's the scope mounting, and hopefully, the scope is not damaged.
BHINES1216
Active Member
I think the marks on the scope are more of stress cracks. I do not believe the scope has shifted.
BHINES1216
Active Member
How do I know if the scope is damaged or is this is just cosmetic?
If those marks are actually cracks, your scope is damaged.
Internal damage the reticle will move during recoil, or possibly as you turn the zoom dial.
They look more like movement marks to me but can only see so much in the pics.
Internal damage the reticle will move during recoil, or possibly as you turn the zoom dial.
They look more like movement marks to me but can only see so much in the pics.
BHINES1216
Active Member
Will the minor stress cracks affect performance?
yes.
BHINES1216
Active Member
Darn it. Not sure I have enough time before the trip to send the scope into Vortex.
Unfortunately, it is hard to tell the extent of a damage of the internal components from external visual inspection.
