Alright you guys. After about 10 years of not muzzloader hunting, I broke down and got a new Muzz. My Farmer stopped planting and I had to give up my crop damage permits, so I wanted to be able to hunt with a "gun" in mid-October. Anyway, I have to get it to the range this week. I'm gonna go with White Hots and some 250 Grain Hornady SSTs. I still have some of this Milky White stuff. Will it be a suitable cleaner, or should I go to Wallyworld and get something else? Thanks!
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
I gone and got a CVA Optima.
- Thread starter YZ-80
- Start date
Help Support Long Range Hunting Forum
Critter Picker
Well-Known Member
I use dawn soap and hot water. Pump it up and down the barrel a few times,then boiling hot water. Hold barrel with rag pump the hot water a few times,dry patch then patch with bore butter to prevent rust. Done.
That will be just fine.
Yeah, that's what I used to do with the Black Diamond I still have. I'd use a funnel and pour boiling water down the barrel after the Dawn and then patch it out with bore butter. I just didn't know if the Milky Stuff and Bore butter are still useful with these new stainless Muzzes. It looks like there are a lot more solvents available now and I see some guys using Isopropyl Alcohol. Makes sense to me but I see other stuff like G96 and foaming bore cleaners that look good too. Just thought I might pick something else up if it makes sense. The gun is new and I plan on cleaning it ever 3 shots at the range. I'm hoping I have it ready to go at 100 yards and know the drop at 200 within about 9-12 shots after I get it on paper.
Critter Picker
Well-Known Member
Windex works with black powder.
Deputy819
Well-Known Member
Let me know when you're ready to go 'smokeless'…..shouldn't take more than a couple deep cleaning sessions. 
hawg chaser
Well-Known Member
That stuff works just fine, but it's not necessary. I'd use it up since you already have it. After that, water and patches is all you need.
My buddy has one of those Savage smokeless powder Muzzloaders, probably from the late 90's or early 2000s. Beautiful thing with a laminate stock and stainless barrel. It seems to me that they are no longer commercially available. I should have thought to ask him if he'd sell it. I remember it being very nice to shoot and Not Clean!Let me know when you're ready to go 'smokeless'…..shouldn't take more than a couple deep cleaning sessions.
I got it set up and bore sighted with a Bubba Scope. Got some cleaning stuff at Wallmart and checked out the ladies. Not much to report on that.
I will go to the range on Thursday and see what I can do with this pumpkin ball launcher.
I will go to the range on Thursday and see what I can do with this pumpkin ball launcher.
I think it's cva that makes a spray foam cleaner I'd have to look . But I just use a old foam ear plug and spray some in and stand the barrel up and go back to cleaning the action and firing pin and spring . When it's done I patch out the barrel and run some tc bore butter it's blue and smells like toothpaste. Blackhorn 209 is definitely the powder most are using but that chit has gotten stupid expensive! I still run it in my paramount pro. Less work cleaning and it's non corrosive.
They make pre soaked patches in a plastic container that work great. And after the patches run out i buy dry patches and put them in the jar and fill with windex.
One last question. Is it still standard practice to use Bore butter? I recall using it to lightly lube the sabot and would leave a light coat of it in the bore after cleaning. Is this necessary with the stainless barrel?
Thanks!
Thanks!
Deputy819
Well-Known Member
When I shot black powder I always did…
ENCORE
Well-Known Member
WAY.... to many good lubricants to use that stuff IMO. It was used decades ago, but very few continue to use it.
Gun Care Product Comparison - Best Gun Care Products - Gun Oil
Product evaluation of 46 gun care products on the market today. Tested for rust prevention, odor, water displacement, lubrication, and compatibility.
nextbukoutdoors.com
Recent Posts
-
-
-
-
-
Interesting video on what we all know is going on with automobiles
- Latest: comfisherman