300 WSM

uknowme62 · Oct 3, 2024

ingers007 said:
Hey Unknowme62, what weight bullets are using with 6.5 staball. Light, medium or heavies?

200gr eldx

Jpron · Oct 3, 2024

I've had darn good luck with staball 6.5 in mine. I'm running 195 gr with a 25 inch barrel. It might be worth a try

floyd kittrell · Oct 3, 2024

adk hunter said:
I'd drop another 30 grains of bullet weight and try the HHT line. You will have both velocity and accuracy.

X2

ByronP · Oct 4, 2024

Schwanz said:
I've got a short barrel (16.5") Scout Rifle in 300 WSM I loaded with H4350.
I maxed out on velocity and case capacity without reaching any pressure signs.
Need a faster powder?
Thoughts, suggestions?

Thanks, Dave.

Not a short barrel but this is my load for my Browning A-bolt IMR4831 62.0gr Lehigh Defense Controlled Chaos 175gr 2.869 COAL

Huntz · Oct 4, 2024

I killed a lot of game with my Tikka 6.5 X 55 with a 140 grain bullet going 2750 out of a 22"barrel out to 500 yards. To get more speed out of a 300WSM you need to have a longer barrel or switch to a 300 Mag of some sort . Its the old lipstick on a pig situation . 300 WSM is a great cartridge . If you are using a can those heavy charges will shorten its life and burn through your barrel fast . JMHO,Huntz

Palix-Dog · Oct 4, 2024

You could try IMR4350. It is a little faster burning powder and may make a difference in the shorter barrel.
I am loading 66grns behind a Serria 190gn Impact bullet getting 2960 fps in a 23" barrel.

ncfireman83 · Oct 4, 2024

Got out today and shot my 180g Partition load, 64.0g H4350, both at book measurement and .020 off. My rifle did not like the .020 jump but this is what it shot after a 2 shot confirmation at 200 (bottom 2 shots) then an adjustment

CMP70306 · Oct 31, 2024

Schwanz said:
I appreciate the input & conversation on the subject.

This rifle happens to be a Factory built Ruger Frontier. I didn't whack 10" of barrel off one. It's kind of an oddball but something unique to play with that fits a niche in my hunting rifle lineup.

In addition to "Gun Love", Shooting & Hunting, I really enjoy the work of developing loads that achieve an optimum combination of accuracy & performance in my rifles. That's all my original post is about.

As is, terminal performance will be more than adequate, and I'm happy with the consistent sub-0.5 moa it's shooting.

If I come up with any noteworthy results from my work, I'll be sure to share with the group.

Dave-

What kind of speeds are you getting? I've had half a mind to get one at 12.5" and make an SBR out of it but there is practically zero short barrel data out there so I have no idea how much velocity loss to expect.

Schwanz · Oct 31, 2024

CMP70306 said:
What kind of speeds are you getting? I've had half a mind to get one at 12.5" and make an SBR out of it but there is practically zero short barrel data out there so I have no idea how much velocity loss to expect.

ADG Brass and 67.5gr H4350 in my rifle is getting 2930fps with the 165 Power Hammer and 2900 with the 165 Barnes TSX. Running about .6 moa with the Hammer, and a little tighter with the Barnes.

I'm leaving well enough alone until after my upcoming hunt, then I'll try some faster powder recommendations and probably drop a notch or two in bullet weight.

300 WSM

uknowme62

Member

Jpron

Well-Known Member

floyd kittrell

Well-Known Member

ByronP

Well-Known Member

Attachments

Huntz

Well-Known Member

Palix-Dog

Well-Known Member

ncfireman83

Well-Known Member

Attachments

CMP70306

Well-Known Member

Schwanz

Active Member

Similar threads

Recent Posts