marcos0901
Active Member
I have some 123 scenars. I am using it on a mule deer hunt before I built it into a 25 SST. I just want that little extra punch with the 140 class bullets
Load data for 6.5 prc
- Thread starter marcos0901
- Start date
Help Support Long Range Hunting Forum
marcos0901
Active Member
I like eldms a lot for hunting. I have a 6mm gt with a 26 inch Krieger barrel. I shoot 108 elms and it has dropped two white tails and the other two didn't make it 40. It causes massive damage in that 6mm
CJ Reichelt
Active Member
- Joined
- Oct 28, 2017
- Messages
- 25
Just loaded up some 147 ELDM over 57 grains of N565. Getting around 2840 FPS and shooting around .5 MOA out of 20 " barrel. Took it out to 520 the other day and dead on. Will see how it works on antelope, deer, and elk this year.
Hugnot
Well-Known Member
I use Staball HD with 140's, 8 twist. I get over 2850 and real good groups. I also use Staball HD in my 6.5-08, 8 twist. Staball HD - 58.5 gr. in 6.5 PRC and 57.5 gr. in olde cheap brass 6.5-06, less than 100 fps difference. CCI 34 primers because I have lots of them.
WYO300RUM
Well-Known Member
What brand brass are you using. If I get much over 55.5 grs. RL26 with ADG brass I get pressure signs. I run 55.0 grs. At 2880 fps. Have lots of N565 and N570. Just loaded some 300 wm with some N565 loads. Just opened an 8 pounder of RL26. Last I have. It has my best loads in 300 wm, 6.5 PRC and 257 bee. Looking for an alternative.
marcos0901
Active Member
I'm just going to use norma brass. I'm going to rebarrel it before next hunting season. I just picked up three boxes of Norma factory ammo for break in and I will just load that brass.
WYO300RUM
Well-Known Member
Have 8 pds of 6.5 Staball. 5 pounds of HD. Haven't tried either in anything. Want to try Staball HD and Ramshot LRT in 300 Rum, 300 wm, 7 rm, 6.5 PRC, 6.5x284 and 257 bee. I only have so much time on this earth . And too many rounds to load for.
With 156's, ADG brass and H1000, I am getting 3005 fps with a 27" barrel. I started at 2950fps but barrel sped up. Still shoots the same so I didn't bother messing with the charge weight. I am also using a long action and loading the bullet long. No pressure signs.
WYO300RUM
Well-Known Member
I use Norma brass in 257 Weatherby only. All others ADG. Lapua in 6.5x284. Had way better accuracy with ADG in 300 wm than Norma. ADG in 6.5 PRC than Hornady . Less volume with ADG than others.
WYO300RUM
Well-Known Member
In 6.5 PRC H1000 shot well with ADG brass but shot better with RL26 and about 100 fps faster. Same in 300 wm and 257 bee.
I shoot 156 Bergers in 6.5 PRC as well. Have my CDS dial set for a RL26 load. 24 in. Barrel. Around 2880 fps.
I tried RL26 but it was a little squirrelly above 85 degrees, so I stopped using it.
WYO300RUM
Well-Known Member
I know what you mean... even when your rifle gets hot while testing loads. I don't worry because not hot here durning hunting season and not shooting Prarie dogs. Lol. I have a lot of N565 and I know it's temp stable. Thinking of trying to find a decent load with it to replace loads with RL26. Starting with 300 wm Wednesday. Got some ideas here for 6.5 PRC so far.
marcos0901
Active Member
I run 6.5 staball in my 6mm gt it is pretty solid once I found the perfect spot. I want to get ahold of more RL 15,17,23,26,27. Everything I have put RL in it loved no matter the chargeHave 8 pds of 6.5 Staball. 5 pounds of HD. Haven't tried either in anything. Want to try Staball HD and Ramshot LRT in 300 Rum, 300 wm, 7 rm, 6.5 PRC, 6.5x284 and 257 bee. I only have so much time on this earth . And too many rounds to load for.
Last edited:
WYO300RUM
Well-Known Member
Good luck on RL26 and RL23. I'm over it. 6mm or 6.5 ?
