Lapuatom
Well-Known Member
Recently purchased a Weatherby mod 307 in .243. It has a 7.5 tw and I was wondering how much spin a vmax bullet can take before they give up the ghost?
.243 vmax bullets/rpm limits
- Thread starter Lapuatom
- Start date
Help Support Long Range Hunting Forum
dirtytough
Well-Known Member
Supposedly 300,000 rpm's. So like 3125 fps out of a 7.5 twist.
I have heard of people shooting them with a lot more RPM's then that though.
I have heard of people shooting them with a lot more RPM's then that though.
Black Hat
Well-Known Member
With that twist rate I'd be aiming heaver than 87 grain, something like 105 VLD.
- Joined
- Jan 26, 2015
- Messages
- 1,787
The vmax may or may not come apart at that twist rate and speed. It's one thing to do it with a new, and hopefully smooth, fresh barrel. As the throat becomes rough and fire cracked, it likely won't hold up. I recently had this discussion with Bartlien Barrels on an order I was placing for a 6 Max
lancetkenyon
Well-Known Member
I can tell you this.
I did the testing for the very first 6SST.
26" 1:7" Brux 5R
A 6mm 85 VMax WILL vaporize at 3450fps. 355,000 rpm
It was pretty cool to witness.
I did the testing for the very first 6SST.
26" 1:7" Brux 5R
A 6mm 85 VMax WILL vaporize at 3450fps. 355,000 rpm
It was pretty cool to witness.
- Joined
- Jan 26, 2015
- Messages
- 1,787
I bet!
This...........it all has to do with how smooth or rough the bore is
Personally, I'd be all over the 70 NBT. Used to run it a lot in a 6/06, it was a wicked killer of small and big game
Black Hat
Well-Known Member
So in this case 307,200rpm with a 85Vmax @3200fps, should be fine but I doubt it's optimal for that BC.
If blistering speed with light projectiles is your game, a 1:9 twist would be a better choice, I've found twist rate can affect accuracy if it doesn't match the projectile.
Lapuatom
Well-Known Member
We ended up running 87 vmax @ 3250 without issues. Running 87 gr Absolute Hammer @ 3400. Rifle is a sub inch gun, nice hunting rifle.
Lapuatom
Well-Known Member
That's a bomb waiting to go off!
Airedale56
Well-Known Member
Lapuatom,
According to the formula, I've run a 58 grain VMax in a Wby Accumark ULW .243 Win 1/10 twist 24" at 280,000+ rpm @3900 fps for over 25 years on coyotes. The bullet never came apart before impact.
Running the same load in a WBY 307 Range XP . 243 Win 1/7.5 twist 22" at 369,000+ rpm @3850fps still isn't vaporizing the bullet, before it gets to paper at least.
Looking for a wolf to test Berger 108 Elite Hunters on….
According to the formula, I've run a 58 grain VMax in a Wby Accumark ULW .243 Win 1/10 twist 24" at 280,000+ rpm @3900 fps for over 25 years on coyotes. The bullet never came apart before impact.
Running the same load in a WBY 307 Range XP . 243 Win 1/7.5 twist 22" at 369,000+ rpm @3850fps still isn't vaporizing the bullet, before it gets to paper at least.
Looking for a wolf to test Berger 108 Elite Hunters on….
Last edited:
M1A1ABRAMS
Well-Known Member
Can I acquire to what book that is ?
