Scope is 2" high. I used S & B 300 match and one reload was 300 AB with 91gr of h1000. Sorry I don't have anything to check the speeds yet.View attachment 643028
Now imagine his first zero was 100, how high would he be at 200?
To know for sure what his real zero is, what's his scope height, BC, velocity, pressure, etc.
Then run the calcs until you get the 4 inches high at 200 and that would tell you what his 'actual zero' is.
So...where is his "second zero" if the "First zero" is at 100....View attachment 643028
Now imagine his first zero was 100, how high would he be at 200?
To know for sure what his real zero is, what's his scope height, BC, velocity, pressure, etc.
Then run the calcs until you get the 4 inches high at 200 and that would tell you what his 'actual zero' is.
At 100 the holes touch or 1/2" space at 200 1/2" to 1". And all high and alittle left as well. I aimed all at same point. Don't touch scope turrets only adjust the front front 100 to 200.
At 100 they are perfect. The group touches or almost. At the 200 it's 4" high and about 1/3" to the left. The group does open up just alittle which is expected shooting farther out.Not sure if just the 200 yard groups or all groups at both distances are "a little high and a little left"
Your zero whatever it is has to be perfect, it can't be a little higher or left or right. It has to be perfect in order for any predictions to work.
Definitely confirm (adjust) your zero as close as it can get to perfect.
lol with the red bull. But I will check the sling screw it did line up with the rest. And some one else told me if the parallax has moved in the scope it will be off. Bushnell also told me the same but need to new scope and go through it all again to really seeMy ballistic app won't let me run these numbers, but to have a 100 yd zero and be 4" high at 200, and have a 2" above bore height scope mount, maybe if you were running the bullet at 15,000fps? I doubt that. Unless you got a new hand held rail gun from the US Navy and DARPA.
Bad parallax? If you have a bad parallax, your reticle will move in relation to the target depending on your eye position, meaning you are not actually aiming where you think you are aiming. But to cause 4" @ 200 (or 2" @ 100), you would have to be moving your cheek weld and eye box a TON and have the parallax be WAY off. I don't see that happening.
The other thing I have seen, but not as consistently as to shoot 1/2 MOA @ 200 yards, is hitting a sling stud or Picatinny rail on the bottom of the stock during recoil and jumping the rifle up.
One other thing, but this would be extreme, is barrel harmonics and whip. You would have to be shooting a wet noodle barrel to cause this.
Combo of all 3? Maybe. But again, not to get consistent groups off.
Did you dip your bullets in Redbull? Redbull gives you wiiings? Maybe the bullets are flying away?