806, are there any feeding issues from the magazine with the 300 prc? Also, did you have a Wyatt's mag box installed?
I put the barreled action in a KRG Bravo and have zero feed issues. I may be putting my 7 prc in a 7 rem mag bdl soon.806, are there any feeding issues from the magazine with the 300 prc? Also, did you have a Wyatt's mag box installed?
Check with your gunsmith as the PRC case may have different feed lips vs the 7 mag, I suspect that it will.
All the new cartridges are wheel reinventionsMy vote is for another 7 mag or 300 win. With the current selection of high BC bullets for the 7 it will do most everything you'd want. I might have to have one built just to play with it. In my opinion the 300 win is a hard to beat all around caliber though. There is a lot of great factory ammo for it and it's easy to load for. Good luck with the build!
Hhmmmm 45-70, 06', 7 mauser, 6.5x55, 270Win, 8mm Mauser, 7.62x54, the youngest is 98 years old. All are efficient & well used yet todayAnd so are new tires, but vastly a huge improvement of what was available in the 60's
I might have missed it but is your 7mm a Remington Magnum or a Remington Ultra Magnum? It is my understanding that the feed rails on the RUM line of cartridges are cut differently than standard magnums. When I was looking to rebarrel a 300 RUM to something a little shorter, I read in a couple of places that a PRC might not feed well from a BDL style RUM action. So, I went with a long-throated 30 Nosler.I have a Remington 700 in 7mm that's loosing accuracy (throated about 4"). I'm looking at doing a low budget build. I don't want to do any modifications to the action, magazine or stock. The stock is for a sendaro profile. I am wanting to get into a LR target rifle that I can hunt with.. I'd like something that shoots somewhat flat like a 338 edge but doesn't like the crap out of you. I shot a 338 ultra without a break and I don't care for that kind of recoil in a hunting rifle. I will put a break on whatever I build. What do you recommend and why? Thanks in advance
Look on Gunbroker. I saw one on there recentlyIt's currently a standard Remington 7mm so il probably go back to rem 7mm. I picked up a long range barrel. If I don't find a Sendaro 7mm take off il be installing the long range soon.