Tikka T3 300 WM load recommendations

Rick Richard

Well-Known Member
Joined
Jan 7, 2014
Messages
7,978
Location
North Carolina
For the guys who have experience with Tikka rifles in 300 WM, I am looking for load recipes for 180 grain pills.

I can't seem to get the rifle to shoot moa. I have shot various factory loads and some reloads using Reloader 22 and 180 Accubonds without much success.

Any info will be much appreciated

Thanks in advance.
 
Mine really likes 74 grains of imr 7828. I really like 7828 and it doesn't seem to be as popular as others so you can almost always find it.
 
Not Tikkas, but I've had good results in several 300WM with 72.8 gr RL22 and 190 Sierra Matchkings. Should run about 2900 fps.
 
No tikka here, But my savage is producing .75 MOA at 100yds. with Berger 185 VLD Hunting bullets.
77 grs. of H-1000 seated to a jump of .131 Velocity is around 2850FPS
 
i reload for my partner flr his tikka 300wm - usong berger 210 otm rem case 250 cci magnum primers and h1000 or ram shot magnum ' bullet is 0.0010 in the land and group with both powders is 0.25 moa
really easy to load .
make sure your barell is freefloated and do a bedding job with aluminum pillars .
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top