Danehunter
Well-Known Member
On the other hand, I wonder if I could re-chamber or re-barrel my 300 Win mag A-Bolt to 300 PRC?
Eric B.
Eric B.
The 6.5 PRC, "The one that got away"
- Thread starter Danehunter
- Start date
Help Support Long Range Hunting Forum
- Joined
- Jan 30, 2016
- Messages
- 693
You would have to figure how to add cip length bottom metal to it.
Danehunter
Well-Known Member
jd, I'll have to look up the COAL of the 300 PRC, as well as the cartridge base size.
If all is OK I will bet you there will be more than a few guys re-chambering their .300 Win Mag barrels. to 300 PRC.
Eric B.
If all is OK I will bet you there will be more than a few guys re-chambering their .300 Win Mag barrels. to 300 PRC.
Eric B.
- Joined
- Jan 30, 2016
- Messages
- 693
You will have to have bottom metal at 3.7-3.715. I know.. I have one.
Danehunter
Well-Known Member
OK, I bought the 6.5 PRC Browning X-Bolt Pro. Same exact action as the 6.5 CM but larger bolt face, natch. Magazine barely accomodates the 6.5 PRC cartridge. No room for a longer than SAAMI COAL. 
(
Now I'll sell my 6.5 CM X-Bolt Pro W/ a spare magazine. Only 60 rounds through it. Barely broken in. And I'll likely sell the .300 Win mag Browning A-bolt. It's the Stainless Stalker W/ black Teflon coating (military grade, from vendor who does Navy SEAL weapons with Teflon). Lapped barrel.
New scope too, Bushnell Elite LRTS 4.5 - 18 x 44 W/lluminated G3 reticle. Very nice.
Same Talley 30 mm rings W/ matching burnt bronze Cerakote. Very custom looking!
Eric B.
(Now I'll sell my 6.5 CM X-Bolt Pro W/ a spare magazine. Only 60 rounds through it. Barely broken in. And I'll likely sell the .300 Win mag Browning A-bolt. It's the Stainless Stalker W/ black Teflon coating (military grade, from vendor who does Navy SEAL weapons with Teflon). Lapped barrel.
New scope too, Bushnell Elite LRTS 4.5 - 18 x 44 W/lluminated G3 reticle. Very nice.
Same Talley 30 mm rings W/ matching burnt bronze Cerakote. Very custom looking!
Eric B.
Don A Parsons
Well-Known Member
This is why I'm running with a long case 65 this year,,, if it pans out the rest of the irons will stay shelved...
Elk is my bread and butter,,, so long as I close the gap they will tumble... I could of done a Creed for my hunting needs as well...
Get those 140's clipping along and send an extra to target to make sure it's down,,, it might not hold water like my 30/06,,, but it will be pretty close
Elk is my bread and butter,,, so long as I close the gap they will tumble... I could of done a Creed for my hunting needs as well...
Get those 140's clipping along and send an extra to target to make sure it's down,,, it might not hold water like my 30/06,,, but it will be pretty close
I'll be off to the range this weekend after I do some handloads. New 300PRC build
I just finished last night. We were somewhat disappointed with the nightforce rail, the rail fit was a little sloppy and we ended up bedding it. Anyways.... I'll report back after range day. Thanks to Tyson Crabbe at CPrecision in Dallas, GA for the Smith work and consulting. Thanks to Redhawk Rifles for helping with items needed. 8.3 lbs with optic and bipod, 26" Proof Carbon barrel, Trigger Tech trigger, Hawkins CIP length bottom metal, Accurate CIP mags, Graybow stock, Surefire Brake, Seekins Precision rings, nightforce rail, Vortex PST gen 2 FFP, Blueprinted Rem 700 action, KRG Bolt knob.
I just finished last night. We were somewhat disappointed with the nightforce rail, the rail fit was a little sloppy and we ended up bedding it. Anyways.... I'll report back after range day. Thanks to Tyson Crabbe at CPrecision in Dallas, GA for the Smith work and consulting. Thanks to Redhawk Rifles for helping with items needed. 8.3 lbs with optic and bipod, 26" Proof Carbon barrel, Trigger Tech trigger, Hawkins CIP length bottom metal, Accurate CIP mags, Graybow stock, Surefire Brake, Seekins Precision rings, nightforce rail, Vortex PST gen 2 FFP, Blueprinted Rem 700 action, KRG Bolt knob.
I think your scale is off by a couple pounds.
Just put a 10lb weight from one of my dumbbells in the scale to calibrate. It was off 1.25 lbs. Gun weighs just a tad over 9.5, call it 10lbs. Still very happy with that.
Last edited:
Danehunter
Well-Known Member
FOR NOW:
Sell the 6.5 CM Browning X-Bolt Pro
Sell the .300 Win mag HS Precision Rem.-actioned target rifle
KEEP the .300 Win mag Browning A-Bolt "just in case" but sell the old MOA/mildot Burris Black Diamond scope and put my SWFA SS 3 - 15 x 42 mil/mil scope on it.
Also likely Sell my 5.56 NATO Slyer AUG & ten 30 round mags. A really great bull pup
Sell the 6.5 CM Browning X-Bolt Pro
Sell the .300 Win mag HS Precision Rem.-actioned target rifle
KEEP the .300 Win mag Browning A-Bolt "just in case" but sell the old MOA/mildot Burris Black Diamond scope and put my SWFA SS 3 - 15 x 42 mil/mil scope on it.
Also likely Sell my 5.56 NATO Slyer AUG & ten 30 round mags. A really great bull pup
northhunter
Well-Known Member
I know this is an old thread, but do you still like your 6.5 prc?
Yes
