Tbac suppressor mount

[hunter87]

About to pull the trigger on my first suppressor it will be a tbac 338 ultra gen 2 or the new 338 gen 2-rr. My main question is for people that have tbac suppressors with the cb mount, do you ever have a problem with the can coming loose, and wishing you had the sr mount, or is the sr mount on a bolt gun not worth the extra cost and just get a cb can. Just wondering if the extra cost of the sr mount is needed on a bolt gun.

 

[WeiserBucks]

Never had an issue with the CB mounts. SR mounts were created for a very specific military solicitation and subsequently offered to the public.

 

[Tom264]

Could not tell you about the cb mounts but I have the same can with the sr mount and it will not come loose I can guarantee that.

 

[hunter87]

Could not tell you about the cb mounts but I have the same can with the sr mount and it will not come loose I can guarantee that.

How do you like it?

 

[Rick Richard]

Any argument against a "direct mount"?

 

[hunter87]

Any argument against a "direct mount"?

I'd rather have a brake attachment so if I don't want to run the suppressor I can just unscrew it and have the brake on it already

 

[J-L]

Never had a problem with loosening, the timing can be a pain in the rear sometimes with the brake but you have the peel washers. I always torque to spec with rockset.

The only time i ever had an issue was trusting a gunsmith to torque to spec w rockset and he didnt and the brake came off with the can, then i had to remove the brake - fun

 

[WeiserBucks]

Any argument against a "direct mount"?

People will argue direct thread vs the universe until the cows come home.

 

[Tom264]

Love it.
I can loosen the lock ring and have it locked on another rifle in less than 20 seconds.
Also noticed someone asked about direct thread.
TBAC does not have a DT 338 ultra suppressor.
SR or CB only.

 

[waspocrew]

For my 338 Ultra, I ended up going with the Area 419 mounts - definitely less expensive than buying a bunch of the CB mounts. Makes swapping between rigs very simple and mounting the brake again only takes seconds.

 

[Bucklowery]

I love the CB. It locks up tight every time and swap to other rifles

Thanks

Buck

 

[Reelamin]

Any argument against a "direct mount"?

Recoil on heavy kickers.

 

[Rick Richard]

Recoil on heavy kickers.

I don't understand your comment. Can you please explain?

 

[lancetkenyon]

I run TBAC CBs on 14 of my rifles. I swap cans around between those rifles. If you snug the cans to the CB on tight, they shouldn't loosen up.

Thousands of rounds with my cans mounted up.