Talley one piece misaligned

[bigngreen]

Its not a rail, they are talley lightweight rings. I'm sure you and most people here are very familiar with them, and yes I have acknowledged the action issue.. I'm just unsure of how to remedy the situation without going to a one-piece system.

The thread heading says one piece so treat it as a rail which it is, bed it then lap it and your done!
Unless your talking the two piece rings which I'd just bed them by putting the screw in loose under the ring then clamp the lapping bar in and snug up the outer screws.

 

[ohiohunter]

The thread heading says one piece so treat it as a rail which it is, bed it then lap it and your done!
Unless your talking the two piece rings which I'd just bed them by putting the screw in loose under the ring then clamp the lapping bar in and snug up the outer screws.

Ah, I see the confusion. They are the 2 piece lightweight rings.