• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

show me your light/med weight magnums!

86495180-94D0-49DF-AE21-B9B864FD0E28.jpeg
Tikka T3x lite 7 Rem mag with terminator brake. Talley lightweight rings and a VX3 LR 4.5-14x50 tips the scales at 7# 12oz
 
.338 Norma Mag

Rem 700 action, fluted bolt, time/tig job by LRI, drilled and tapped #8 base screws

Lilja #5 24" barrel, shank cut to 1" in front of recoil lug, spiral fluted, 5/8x24 thread

MBM Beast 5 port titanium brake

Manners EH-1 arctic molded camo, 2 flushcups, 1" recoil pad

PTG aluminum bdl bottom metal, Wyatts 3.850 mag

Area 419 10" ARCA rail

TT Primary flat blade trigger

March 2.5-25x52 illuminated, bedded into a DNZ 215 one piece aluminum scope mount, that is bedded to the reciever

Wheeler flip out scope level

20200118_163836.jpg


Loaded ready to hunt with over a quarter lb of ammo, 9.6 lbs. Recoil is very manageable, two pronghorn, a deer and an elk from 200 yards out to 887, I spotted all my impacts.

20201208_165548.jpg
20201208_165605.jpg
 
Last edited:
Would you mind showing me what the muzzle diameter looks like on your barrel? Preferable brake removed. I'm debating if I want that contour or slightly thinner. Also, how long is your barrel?
I'm not home currently will be this weekend early next week. But it's a northland shooter supply criterion prefit 26" barrel.
 
LPR 7 saum Lone Peak Ti 26" Proof with NX8 4-32. Sits just a little over 8lbs

Not a mag but my 7x57AI Rem 700 trued up on McMillan Edge with Swaro Z3 3-10 sits at 7.25lbs. Shoots 160 ABs at 2835 with 21" tube and no pressure.
 

Attachments

  • 296EDD81-288B-4CFA-B03D-01C387FA592B.jpeg
    296EDD81-288B-4CFA-B03D-01C387FA592B.jpeg
    1.5 MB · Views: 137
  • E8ECE014-E4C9-4F8C-83C0-2CB579420A8C.jpeg
    E8ECE014-E4C9-4F8C-83C0-2CB579420A8C.jpeg
    1.1 MB · Views: 133
I'd love to see some lightweight-medium weight Magnum builds you guys have done. Preferably hunting rifles. I've wanted a 7mm Rem Mag for years. I can't tell you why I want that specific cartridge, but my gut won't let me not have it. I hunt eastern Pa where the deer and bear don't need much more punch than my .270 can dish. I'm debating putting a 7mm Mag together from Savage parts this winter to satisfy my craving, but I want it to be practical for my hunting; not overbearing to carry (sub 10lbs scoped), probably heavy sporter weight barrel in the 24-26" category, braked. I want to be able to put it over my shoulder and walk around these tall hills looking for new vantage points. And should a shot at 500-700 present itself, cleanly and confidently take it. My .270win is capable of doing that now, but the 7mm will also be my primary bear rifle, and I want the stopping power that caliber provides.
I have a 338 Win. Mag. with scope and bi-pod just a tick under 10 lbs. Throwing 225 Barnes out of a 20" tube at 2700 f.p.s. good to about 600 yards for Elk and should work for Moose as well.
I have a Savage in 7 mm Mag at just under 9 lbs. with a 24" pencil barrel throwing 160 grain AccuBond at 2900 f.p.s. good to about 600 yards for Elk and may work on Moose, tho I have never hunted a moose.
 

Attachments

  • 20201208_210303.jpg
    20201208_210303.jpg
    884.8 KB · Views: 87
I'd love to see some lightweight-medium weight Magnum builds you guys have done. Preferably hunting rifles. I've wanted a 7mm Rem Mag for years. I can't tell you why I want that specific cartridge, but my gut won't let me not have it. I hunt eastern Pa where the deer and bear don't need much more punch than my .270 can dish. I'm debating putting a 7mm Mag together from Savage parts this winter to satisfy my craving, but I want it to be practical for my hunting; not overbearing to carry (sub 10lbs scoped), probably heavy sporter weight barrel in the 24-26" category, braked. I want to be able to put it over my shoulder and walk around these tall hills looking for new vantage points. And should a shot at 500-700 present itself, cleanly and confidently take it. My .270win is capable of doing that now, but the 7mm will also be my primary bear rifle, and I want the stopping power that caliber provides.

I failed to mention my wife's .338 WM. @ 8 pounds 11 ounces.....all up! 225 TTSX's @ 2950......no furture explanation necessary! 😉 memtb

7fBp89Vl.jpg
 
LPR 300 win 8.5lb
Borden Timberline LA
HCA Heavy hunter 26 in
Seamless break
Manners EH1
 

Attachments

  • F6930D25-9185-4E25-8439-30D6D1C1B92B.jpeg
    F6930D25-9185-4E25-8439-30D6D1C1B92B.jpeg
    622 KB · Views: 90
  • B132F398-E27B-49FD-B2EE-7EF55AC0ECFF.jpeg
    B132F398-E27B-49FD-B2EE-7EF55AC0ECFF.jpeg
    622 KB · Views: 92
  • 74784D80-978D-4F1C-96EF-8DC89C718DB4.jpeg
    74784D80-978D-4F1C-96EF-8DC89C718DB4.jpeg
    616.5 KB · Views: 93
  • CB430BDF-EAAF-450D-9159-43A9B8BEFA51.jpeg
    CB430BDF-EAAF-450D-9159-43A9B8BEFA51.jpeg
    628 KB · Views: 99
  • 63D3336D-F6A3-4FDF-A812-4C8243722384.jpeg
    63D3336D-F6A3-4FDF-A812-4C8243722384.jpeg
    638.7 KB · Views: 92
  • 1557EF47-BD8F-4E8C-A021-295707403426.jpeg
    1557EF47-BD8F-4E8C-A021-295707403426.jpeg
    619.3 KB · Views: 98
  • 58E710D1-B2C5-4109-AA54-F3ABDCB08E4C.jpeg
    58E710D1-B2C5-4109-AA54-F3ABDCB08E4C.jpeg
    636.8 KB · Views: 98
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top