Scope rings

[hammer111]

I have a bergara ridgeback 6.5prcwith area 419 base.
I'm leaning towards one piece rings . To keep the scope as straight as possible. Or does it matter? This will be a range gun strictly.
Thanks

 

[ShtrRdy]

If the top of the receiver is straight/flat and the Area 419 rail/base is straight/flat then it's not to important to use one piece rings.

 

[ntsqd]

Straight and flat to what tolerances? Nothing it truly straight and nothing is truly flat, but at some point the deviations are too small to matter to the application.

 

[bultinkle]

That part doesn't matter. Just get a good set from known manufacturers and don't cheap out

 

[hammer111]

That part doesn't matter. Just get a good set from known manufacturers and don't cheap out

Absolutely I'm not cheaping out on anything with this gun

 

[Hugger-4641]

Get some Burris Signature rings and you won't need a 20moa rail later.

 

[Varmint Hunter]

Get some Burris Signature rings and you won't need a 20moa rail later.

And .... the scope will be perfectly straight regardless of the receiver tolerances, the scope tube won't get bent and the rings will not pinch or mar the finish of the tube.

Burris Signature rings have been underrated for too long. I have a few sets on magnum rifles and they hold just as well as high dollar rings.

Just my 2 cents

 

[skipglo]

Absolutely I'm not cheaping out on anything with this gun

Then you might as well jump straight to a Spuhr mount ! ... But sit down first!

 

[Hugger-4641]

And .... the scope will be perfectly straight regardless of the receiver tolerances, the scope tube won't get bent and the rings will not pinch or mar the finish of the tube.

Burris Signature rings have been underrated for too long. I have a few sets on magnum rifles and they hold just as well as high dollar rings.

Just my 2 cents

For some folks, $150 is high dollar rings! Wasn't that long ago I was in that camp too

 

[Varmint Hunter]

For some folks, $150 is high dollar rings! Wasn't that long ago I was in that camp too

$150 for a set of rings is high dollar to me. I'd use them if it was necessary, but it's not.

 

[Hugger-4641]

$150 for a set of rings is high dollar to me. I'd use them if it was necessary, but it's not.

You must not have bought any Signature rings lately I just bought a set of 34mm High Rings and they were $149 shipped.

 

[Varmint Hunter]

You must not have bought any Signature rings lately I just bought a set of 34mm High Rings and they were $149 shipped.

It sounds like you got taken for a ride. Here's the same set for $82.

Burris 34mm Signature Zee Weaver Rings Matte Black High

The revolutionary Signature design produces consistent accuracy, tremendous gripping power and stress-free mounting. These steel rings include a...

www.midwayusa.com

 

[hammer111]

Then you might as well jump straight to a Spuhr mount ! ... But sit down first!

Oh I looked at them but I draw a line at ridiculously priced . When there's products just as good but reasonably priced. I had a good laugh

 

[Hugger-4641]

It sounds like you got taken for a ride. He's the same set for $82.

Burris 34mm Signature Zee Weaver Rings Matte Black High

The revolutionary Signature design produces consistent accuracy, tremendous gripping power and stress-free mounting. These steel rings include a...

www.midwayusa.com

Nope , never tried those, I bought these:

Burris 34mm Xtreme Tactical Signature Picatinny-Style Rings Matte

The Burris Xtreme Tactical Signature Rings are designed with the tactical shooter in mind. While delivering ample holding power the Xtreme...

www.midwayusa.com