• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Scope adjustments?

Shubey said:
What is meant by 0 stop issue? Please explain.
Click to expand...
Order allen wrench from Amazon.
Back zero stop all the way out.
Zero rifle.
Reset zero stop.

You are basing all this on not having the correct tool. Which you didn't state in your earlier posts. Get the tool, fix the problem.

Amazon product ASIN B0BJJS99ZS
 
Last edited:
First you say you don't have an allen wrench to fit the zero stop.
Now you have the allen wrench, but can't find the zero stop...
download (5).jpeg
 
Last edited:
16 17
Re-Zeroing Your Scope
Certain Sightron riflescope models are
resettable to zero after sighting in your riflescope.
1. Models with Locking Turret.
To reset the Locking
Turret to zero, simply loos-
en the three 1.27mm Allen
Screws located around the
top lip of the turret knob.
Rotate the turret knob
to zero aligning with the
revolution counter under
the turret knob and tighten the three set screws
evenly around the turret knob.
Note: Do not remove the 3mm Allen Screw
located on top of the turret knob.
2. Target Models.
To re-zero all target models loosen either the
1.5mm or 1.27mm Allen Screws located around
the top lip of the turret knob or Torx 20 screws
located at the top of the turret knob. Rotate the
knob until the zero mark lines up with the index
line on the revolution scale underneath the turret
knob. Re-tighten the Allen or Torx screws.
 
huntsman22 said:
16 17
Re-Zeroing Your Scope
Certain Sightron riflescope models are
resettable to zero after sighting in your riflescope.
1. Models with Locking Turret.
To reset the Locking
Turret to zero, simply loos-
en the three 1.27mm Allen
Screws located around the
top lip of the turret knob.
Rotate the turret knob
to zero aligning with the
revolution counter under
the turret knob and tighten the three set screws
evenly around the turret knob.
Note: Do not remove the 3mm Allen Screw
located on top of the turret knob.
2. Target Models.
To re-zero all target models loosen either the
1.5mm or 1.27mm Allen Screws located around
the top lip of the turret knob or Torx 20 screws
located at the top of the turret knob. Rotate the
knob until the zero mark lines up with the index
line on the revolution scale underneath the turret
knob. Re-tighten the Allen or Torx screws.
Click to expand...
Wow, thanks for your help that took time! I appreciate it indeed!
 
huntsman22 said:
16 17
Re-Zeroing Your Scope
Certain Sightron riflescope models are
resettable to zero after sighting in your riflescope.
1. Models with Locking Turret.
To reset the Locking
Turret to zero, simply loos-
en the three 1.27mm Allen
Screws located around the
top lip of the turret knob.
Rotate the turret knob
to zero aligning with the
revolution counter under
the turret knob and tighten the three set screws
evenly around the turret knob.
Note: Do not remove the 3mm Allen Screw
located on top of the turret knob.
2. Target Models.
To re-zero all target models loosen either the
1.5mm or 1.27mm Allen Screws located around
the top lip of the turret knob or Torx 20 screws
located at the top of the turret knob. Rotate the
knob until the zero mark lines up with the index
line on the revolution scale underneath the turret
knob. Re-tighten the Allen or Torx screws.
Click to expand...
 
I used the Z rings and inserts on my Mosin Nagant to get more cant for long range. They worked fantastic and have even held zero after dropping the gun twice in a fall
32AA6E05-C898-4AAB-9B81-31D3D5D68223.jpeg
 

Similar threads

D
Scope adjustments
Replies
0
Views
669
david g ranes
D
L
scope adjustments
Replies
3
Views
981
WildRose
WildRose
W
Light changing and scope adjustments
Replies
0
Views
438
woodnut
W
S
Click Adjustments
Replies
5
Views
2K
pinshootr
pinshootr
R
adjusting scope
Replies
2
Views
2K
Russ M
R

Recent Posts

Top