hunter0528
Well-Known Member
Could your primers gotten contaminated?
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Rem 9 1/2 mag
- Thread starter meatyrem
- Start date
Help Support Long Range Hunting Forum
meatyrem
Well-Known Member
No. They were brand new brought them home and put them in cases.
Also never had an issue ever in the over 10 years I've had this encore with not firing. Then I load the rem 9 1/2 mag in it and close to half of them don't go off.
Also never had an issue ever in the over 10 years I've had this encore with not firing. Then I load the rem 9 1/2 mag in it and close to half of them don't go off.
meatyrem
Well-Known Member
I have since unloaded them and found Fed 215 which is what I loaded in all my other cases and never had an issue.
meatyrem
Well-Known Member
Thanks all for your input.
meatyrem
Well-Known Member
And they wouldn't let me return the two bricks I had so I had to go somewhere else for less of a deal but walked away with different primers I couldn't find for a long time
Returning primers has always been an issue. Except 50 years ago.....hmmm...
How are those working for your load now? Any findings noteworthy?
quigley257
Well-Known Member
Another issue I have heard of with the Contender/Encore platforms is people having light strikes after adding a hammer spur. The weight of the spur is just enough to slow the hammer down to the point that ignition became inconsistent. Couple that with any headspace issue and you can start getting FTF problems.
My concern is that one type of primer caused an issue while other types did not. It may be a gun issue contributing to the ftf but why. As you stated there are issues posted. I would hate to think that the OP has to exclude one type of primer to satisfy the gun. What with finding and then paying for primers being such a pita!!
meatyrem
Well-Known Member
I had to do a "trade" as the store wouldn't take them back. I lost on it but still ended up getting more of a different brand.
I haven't tried yet may try and load up tonight as I had to clean size and trim brass and prime. So maybe get at it tonight hopefully
meatyrem
Well-Known Member
It's the pro hunter with swivel hammer factory no add ons.
meatyrem
Well-Known Member
As I mentioned before it has performed flawlessly in the 10+ years I've used it and put a whole box of factory federal ammo down it and at least a couple other boxes worth previously of hand loads without one ftf until rem 9 1/2 some went off and many didn't. 
Ya gotta like the brass prep chore...
Did you trade them back to the store you bought them from? More is almost always better. Hope it works out! Stay safe and have fun.
meatyrem
Well-Known Member
No they wouldn't take them.
Went to another place that gladly took them but at a lower price and their primers were much more expensive 2x more and some match were 3X more
Went to another place that gladly took them but at a lower price and their primers were much more expensive 2x more and some match were 3X more
