• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Now what?

Well guys thanks for all the help. I got some rounds loaded up and did the break in on the gun. Shot right around 1 Moa at 100 yards. Will get out this weekend and see how it shoots now.
So here is what I did to the gun.
Remington 700 sps 7mm
Vortex viper hs 4x16x50
Warne steel bases and rings
Bell and carlson medalist stock
Timney 517 trigger set at 2.5 pounds.
The starting load was 162 amax with 66 grains of h1000 coal set at 3.400
 

Attachments

  • image.jpg
    image.jpg
    234.1 KB · Views: 58
Nice looking setup.

Spend whatever is left of your $1000 on powder and components, then go wear the barrel out.
 
Al ready got brass, bullets and powder for it. As soon as the barrel is done a benchmark barrel will go on and and the action will be trued.
 
Warning! This thread is more than 10 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top