The Oregonian
Well-Known Member
There have been some for sale this year. I bought some a few months ago and someone had them in stock within the last couple of weeks.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Nosler, what’s up???
- Thread starter Laguna Freak
- Start date
Help Support Long Range Hunting Forum
Description says Accubond Long Range bullets, not regular Accubonds. Although I don't think they make a 30/180 ABLR bullet so probably a misprint on Winchester's part.Expedition Big Game ™ - AccuBond CT | Winchester Ammunition
Winchester Expedition Big Game uses the tough, deep penetrating Accubond Long Range bullet for supreme performance on the biggest game.winchester.com
These are what nosler makes those bullets for.
Midsouth has 30/180 Accubonds yesterday.
Bobby-Long
Active Member
I visited Nosler Pro Shop twice this summer. The pro shop has a different selection of bullets than the website, although inventories overlap some.
The 180 grain coated accubonds were available for close inspection. Overall they looked pretty good, but the bullet heels had some small dings.
I went for a tour of the facilities. Many of the bullet swages were pumping out NBTs, accubonds and custom completion bullets. Lots of busy people and many machines operating. There was a stack of lead ingots and a tech was extruding one into 6.5mm lead wire to feed into a bullet swaging machine. The shipping warehouse was packed full of pallets of ammo, including 6.5 PRC. Many if the boxes of ammo were loaded with accubond bullets. Their shipping department building is nearly as big as the production facility. Demand is over the top guys. Nosler now has a cartridge manufacturing plant just north of the bullet plant, I can only imagine they are stuffing a bunch of bullets into new cases.
This was what I saw this summer.
The 180 grain coated accubonds were available for close inspection. Overall they looked pretty good, but the bullet heels had some small dings.
I went for a tour of the facilities. Many of the bullet swages were pumping out NBTs, accubonds and custom completion bullets. Lots of busy people and many machines operating. There was a stack of lead ingots and a tech was extruding one into 6.5mm lead wire to feed into a bullet swaging machine. The shipping warehouse was packed full of pallets of ammo, including 6.5 PRC. Many if the boxes of ammo were loaded with accubond bullets. Their shipping department building is nearly as big as the production facility. Demand is over the top guys. Nosler now has a cartridge manufacturing plant just north of the bullet plant, I can only imagine they are stuffing a bunch of bullets into new cases.
This was what I saw this summer.
M1A1ABRAMS
Well-Known Member
Did you happen to find out where all the bullets were heading ? I'm in PA & have yet to see any. Ilol
Mathews Diehard
Well-Known Member
Correct, misprint on their part. They also make the expedition long range which does in fact use the long range accubond. These, however, are the regular accubond with the lubelox coating and a red tip.
Last edited:
Laguna Freak
Well-Known Member
I figured something like that was going on. I don't have my finger on the pulse of the firearms development and ammunition production industry, but I do seem to recall reading/hearing about the US Military and other 3 letter federal agencies sponsoring research and development of the 6.5 PRC. Seems it was 3 to 5 years ago when this news came out.
We all know how popular the 6.5's have become over the years and PRC is the latest and greatest.
Seems we handloaders are being told to pound sand if we want any selection of Accubond boolits.
WildRose
Well-Known Member
I love the Accubond and Hornady Interbond but I started shooting mono's due to the spotty/rare/unheard of availability of both.
If the shortages of the last decade in both ammo and reloading supplies hasn't taught us anything else it's taught many/most of us versatility.
xsn10s
Well-Known Member
- Joined
- Mar 7, 2016
- Messages
- 7,652
All I know is I get emails from Nosler every few days on what's in stock. If you snooze you lose. 6.5 142 AB's blems in stock. And I've had no issues using blems for hunting. When i lived in Bend most of the Nosler employees did the samething.
Hornady did the R&D for the 6.5PRC, and the round was developed for the precision rifle series, not for military or federal. George Gardner partnered with Hornady but they weren't ready to move it forward back in 2012, so George developed the 6.5GAP4S (or 6.5 SAUM by another name) and worked with Hornady to bring head stamped brass to the market. Hornady brought the PRC out when they were ready.
M1A1ABRAMS
Well-Known Member
And wasn't it the 6.8 mm the military was looking at ?
Army Announces 2 New Rifles for Close-Combat Soldiers
The Army recently awarded a contract for two new soldier weapons: the XM5 rifle and the XM250 automatic rifle, which both will use the new 6.8 mm common cartridge family of ammunition and a new fire
www.defense.gov
birddog 68
Well-Known Member
30 caliber 180 grain accubond are in stock at Nosler right now!
Already gone
birddog 68
Well-Known Member
Not 338 caliber. 30 caliber, still there
