NORTH Idaho Trade WTT/WTS

[mwkelso]

I have an unopened 5lb. jug of IMR4831, also have a bit of H4831 in 1lbers. Do you have any H1000?

I have a 1# h1000 that I don't need. Would you be willing to swap 1 for 1 on the h4831?

 

[Marine sniper]

I have a 1# h1000 that I don't need. Would you be willing to swap 1 for 1 on the h4831?

Sure, I assume yours is unopened?
Feel free to text me.
John
562 221 9660

 

[Nevrsummr]

Recently bought my first 223. Needing dies, cfe223, and or ammo. Not willing to pay ridiculous prices but if anyone is willing to let some go for a reasonable price i would sure appreciate it

 

[Cotay]

Recently bought my first 223. Needing dies, cfe223, and or ammo. Not willing to pay ridiculous prices but if anyone is willing to let some go for a reasonable price i would sure appreciate it

It's a rough time to be getting into a new caliber. I just acquired a rifle in 7.62x39 on the hopes that supply would be more prevalent. Yeah, who was I kidding.

 

[JJMoody]

Saw green tip 556 at black sheep for the typical arm, there was a discount that allowed you to keep the leg. 7.62x39 at US tactical supply on seltice and greens ferry along with some other ammo. 9mm, 308 etc

 

[Marine sniper]

I am looking for H1000, Retumbo, VV 570, 565, 560, 170, RE22, RE25, 7828, and 338 Caliber ELD-X's.

I have for trade Winchester small and large rifle primers.
IMR 4831
H4831
IMR 4831
IMR 4350
748

30 cal
Berger 230 OTM
190 VLD hunters
Nosler 180 Ballistic tip
150 Accubond
Sierra 240 SMK
Sierra 175 HPBT
Sierra 190 HPBT
Sierra 200 HPBT
Nosler partition 180
Swift A-frame 180
Swift Sirocco 165 and 180


338 Caliber
250 Berger OTM
285 Hornady BTHP match

408 caliber
Rocky mountain 420 gr.
Lost river 419 gr.

416 caliber
Swift A-frame 400 gr.
Speer 350 gr. Hot Cor

 

[North Idaho Hunter]

still looking for 143 and 200 gr eldx. have a lot of 6mm and 22 cal as trade stock.

 

[JJMoody]

Anyone in need of 1# IMR 4831?

 

[Xrayvision]

I am looking for H1000, Retumbo, VV 570, 565, 560, 170, RE22, RE25, 7828, and 338 Caliber ELD-X's.

I have for trade Winchester small and large rifle primers.
IMR 4831
H4831
IMR 4831
H4350
748

30 cal
Berger 230 OTM
190 VLD hunters
Nosler 180 Ballistic tip
150 Accubond
Sierra 240 SMK
Sierra 175 HPBT
Sierra 190 HPBT
Sierra 200 HPBT
Nosler partition 180
Swift A-frame 180
Swift Sirocco 165 and 180


338 Caliber
250 Berger OTM
285 Hornady BTHP match

408 caliber
Rocky mountain 420 gr.
Lost river 419 gr.

416 caliber
Swift A-frame 400 gr.
Speer 350 gr. Hot Cor

I would be willing to trade a fair amount of RL22. Could use the H4350. My watch list includes, Berger LRH 144s, Varget, CCI 450. Liberty Lake here. Your location? Thanks

 

[Marine sniper]

I would be willing to trade a fair amount of RL22. Could use the H4350. My watch list includes, Berger LRH 144s, Varget, CCI 450. Liberty Lake here. Your location? Thanks

I would trade you 2lbs of 4350 for 2lbs of RL22

 

[dallen0427]

I would trade you 2lbs of 4350 for 2lbs of RL22

I believe I seen 338 eld-x at my local SW

 

[charliehorse27]

To anyone interested; I have a Bench Source annealing machine I bought earlier this year to anneal my brass after experiencing inconsistent results with a DIY model I built. I have discovered I now absolutely enjoy the process, and thought I'd offer it as a service to fellow local LRH members that don't have access to an annealer themselves. I'm in Post Falls.

For $.20/case, I'll decap it, wet tumble it with stainless steel pins, and anneal the neck and shoulder junction. I'll leave the sizing to you after the process is completed. I use Tempilaq paint in several areas to ensure the process is done appropriately.

Shoot me a PM if you have any questions.

 

[North Idaho Hunter]

@charliehorse27 thats a great service to offer, cheap too!

 

[Nevrsummr]

@charliehorse27

I saw your add on SGT and saved your number. Will definitely be using your services. Really appreciate you making it affordable