• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Need H1000 Loads for New 300 PRC

+005 is where i would load because between there and +010 it had very similar point of impact. It gives you a little wiggle room for throat erosion. Then tweak you powder charge to get where youre happy.
 
Want to try some N570 but can't find any load data. Can anybody get me started with it and the 215 Hybrids? Thanks!
 
Thank you, sir!
I was about to give up on N570 today but man does that gun like 79.5-80.5 grains with the 215s

IMG_1587.jpegIMG_1588.jpeg
 
I think you've found a winner there! Here's the best I've gotten out of 8133 so far (cold bore sighter top left w/X) 5 shots - probably as good as it is going to get. If I can get it shooting like you have there, I'll be good.
 

Attachments

  • E88EDD71-7141-41A7-80DF-98DAC290B4C3.jpeg
    E88EDD71-7141-41A7-80DF-98DAC290B4C3.jpeg
    841.7 KB · Views: 83
I've got a ladder with 245 bergers loaded with 570, think Berger said 2750 ish. Shot a ladder with lrt they said would be similar but it was only 2700ish out of my rifle. Could be my low elevation. Was only shooting 2 shot groups for velocity as I'll be using a tuner but lots of them were touching and one was one hole but will see what n570 does
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top