need a smith to build a rifle

So If im following this correctly the 6.5x284 does not really fit in a BDL rifle very well.
Really don't want a removable mag, really don't like them just my thing.
I want to stay with something with recoil less than a 308. So im thinking the 6.5x284 is as large As Im thinking I should go.
If I need something more Ill use the 7MM Rem Mag or the 300 WSM
This will be used for Rock Chucks
Retiredcpo
 
I would do a 6.5-06, a 6.5-06AI, a 6.5-280AI, a 6.5 Sherman, 6.5 Gibbs, etc. The improved versions will be between a 6.5-284 and a .264wm and all of them will work better on a long action set up for a .270win or 30-06.
 
How hard is it to find brass for these?
IS there plenty of load data out there.
Im guessing the 6.5-06 would be similar to the 25.06 only pushing a 6.5 bullet
that would probably fit need real good
retiredcpo
 
The 6.5-06 is basically identical to a 6.5-284. For brass you use 25-06 or .30-06. The AI version and the Gibbs use the same brass but they are improved for more capacity. The 6.5-280AI is a necked down .280AI and Nosler makes brass for the .280AI. The best load data will be for the 6.5-06, 6.5-06AI, and the 6.5 Sherman since the guy who designed it is on this forum.
 
Personally I don't like fireforming, and that is why anything based on the 280AI and Nosler brass so awesome.
Chris
Benchmark Barrels
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top