Elkeater
Well-Known Member
- Joined
- Dec 3, 2017
- Messages
- 1,420
So I have a Silencerco Harvester EVO sitting in jail right now and realized that all my rifles are threaded except one. My wife's little Weatherby Vanguard youth model in 7-08 Rem is not threaded. It would actually be a sweet little suppressed rifle with the short stock and 20" barrel running 113gr shock hammers at 3,000fps.
My question is what's the minimum muzzle diameter for cutting 1/2x28 threads. This one is only .560" at the muzzle right now and I'm assuming 5/8x24 is out of the question but I'm wondering if 1/2x28 would be doable.
Could also have it cut to 16" where it's .625" diameter.
Can one of the gunsmiths on here help with this?
Thanks
My question is what's the minimum muzzle diameter for cutting 1/2x28 threads. This one is only .560" at the muzzle right now and I'm assuming 5/8x24 is out of the question but I'm wondering if 1/2x28 would be doable.
Could also have it cut to 16" where it's .625" diameter.
Can one of the gunsmiths on here help with this?
Thanks