McGuire Ballistics .224 Heavy/High BC bullet development...

[HRM Johnny]

I am really looking forward to seeing The results that you get.

 

[McGuireBallistics]

.224 71GR

 

[fordy]

.224 71GR

Gday Sam that is just a tease man

Details
Details
Details


That pill has got a very good looking meplat from the picture angle

cheers

 

[ButterBean]

.224 71GR

Send me 50 as soon as you get them ready to go, I'll. Put a credit card on file

 

[McGuireBallistics]

First animal with 22 Creedmoor and our 71GR Copper Rose. Young hunter did great. Boar stepped out at 328 yards. One shot, boar took two steps and tumbled off mountain limp. Pretty good start to project. Ribs are entry side.

 

[ButterBean]

First animal with 22 Creedmoor and our 71GR Copper Rose. Young hunter did great. Boar stepped out at 328 yards. One shot, boar took two steps and tumbled off mountain limp. Pretty good start to project. Ribs are entry side.

Looks like a winner

 

[fordy]

Gday Sam
About time
Nice results & looking forward to seeing more on this
Good trigger skills from the young fella
Cheers

 

[can1010]

also interested in 50 when available. congratulations to the young shooter with a beautiful boar.

 

[McGuireBallistics]

Good start...

 

[JAYgs8163]

Any testing results in the 8twist that you sent away?

 

[McGuireBallistics]

Any testing results in the 8twist that you sent away?

I have not sent any out for testing. We are settling on a length of 1.250. I am pretty sure a 1:7 will be necessary but we shall have to see.

 

[can1010]

I would not put too much faith in stabilizing in 1-8. Sierra 90gr mk need 1-7 with 1-6.5 being recommended and they are 1.160. at 1.250 with that long nose I doubt it stabilizes in 1-8

 

[McGuireBallistics]

I would not put too much faith in stabilizing in 1-8. Sierra 90gr mk need 1-7 with 1-6.5 being recommended and they are 1.160. at 1.250 with that long nose I doubt it stabilizes in 1-8

We have not had problems with the 1:7 but I would not hold my breath on a 1:8.

 

[JAYgs8163]

I have not sent any out for testing. We are settling on a length of 1.250. I am pretty sure a 1:7 will be necessary but we shall have to see.

One of your first posts mentioned you had sent some out for testing in 8twist is why I asked.