• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

matrix 6.5 160gr bc update

Thanks guys.

I've been contacted via email and I'm set.

I'll test these long bullets in both a 1:8" and a 1:6" twist just to see if there's any difference.

It may take a while but it will get done.

Thanks and take care,
-Bryan

Thank you Bryan. We greatly appreciate your involvement.......Rich
 
Thanks Brian! Let me know if you need a spare barrel as well :)
Chris
Benchmark Barrels
 
A friend of mine from Wyoming, shoots the 160 Matrix @ 3390fps out of his 6.5-338 rum imp. He has shot targets to 1800 yds with 1/2 moa accuracy all the way out. He used a BC of .733 to make center elevation hits at 600yds-- 1250yds and 1800yds. Obviously the extra velocity and the 6500ft elevation is giving him a bit of help in the BC department!! ---- RHB
 
A friend of mine from Wyoming, shoots the 160 Matrix @ 3390fps out of his 6.5-338 rum imp. He has shot targets to 1800 yds with 1/2 moa accuracy all the way out. He used a BC of .733 to make center elevation hits at 600yds-- 1250yds and 1800yds. Obviously the extra velocity and the 6500ft elevation is giving him a bit of help in the BC department!! ---- RHB

Has he tried the Woodleigh 160gr PPSN?
 
Heres more info guys, the 160 will not stabilize in a 8.5 twist at 2850 fps. Just FYI
Chris
Benchmark Barrels
 
Have we heard back from Brian on his findings? Thought I may have missed a thread.
 
Last edited:
Here you go
 

Attachments

  • image.jpg
    image.jpg
    83.7 KB · Views: 121
I've been using a .682 G1 BC with good results. I run them at 3440 out of a 6.5/338 rum improved.
 
Warning! This thread is more than 10 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top