Macarbo trigger spring?

[GUNNNN]

Has anyone had any practical experience with these macarbo up grades I'm considering using a trigger spring kit on my abolt 2

 

[Rick Richard]

Has anyone had any practical experience with these macarbo up grades I'm considering using a trigger spring kit on my abolt 2

It worked just fine on an Abolt I had a few years back. Easy install and no issues.

 

[SO I HUNT]

Tikka and ruger

 

[GUNNNN]

It worked just fine on an Abolt I had a few years back. Easy install and no issues.

Thank you I watched the video and it seemed simple to replace it with. Did it seem to help much with the trigger pull

 

[birddog 68]

Thank you I watched the video and it seemed simple to replace it with. Did it seem to help much with the trigger pull

Great upgrade! I’ve put them in 3 of my Xbolt and 1 in a friend’s Xbolt. I don’t have a trigger pull gauge but I’m guessing they went from 3-3.5 down to 1.5-2.5 lbs.
Fairly easy to change out, usually it’s about a half hour at my pace.

 

[HSmithTX]

Just make sure it remains drop safe, cock it and drop the butt on a firm surface from at least belt high (like you are walking in the woods and both feet slip out and you land hard on your butt), I have MCarbo springs and another brand that the name escapes me at the moment, I can't remember which but one wasn't drop safe after the spring install. For a field gun I like to make sure they are drop safe.

 

[choprzrul]

I’ve done 5 or 6 XBolts with that trigger spring and all have really helped with the trigger pull.

 

[Rick Richard]

Thank you I watched the video and it seemed simple to replace it with. Did it seem to help much with the trigger pull

Yep

 

[SnakeRiverEric]

I have 2 Browning's both xbolts and replacing their trigger I always do. I tried the Macarbo on one
it helped some but not to my liking so I went ahead and put the Timney in both of my Browning's
and no issues since.

 

[Mark37082]

It worked great on my Xbolt. I bought 2. Glad I did as I lost one in the process. I found 2 months later. Those suckers are small and springy.

 

[Stadoc]

Thank you I watched the video and it seemed simple to replace it with. Did it seem to help much with the trigger pull

I used one on a cz455, and it works great.

 

[Mooseknuckles]

Used them in Ruger and Winchester m70. Worked excellent.

 

[hesse]

I have used them in a couple different guns they work very well

 

[birddog 68]

I’ve put them in 3 of my Xbolt and 1 in a friend’s Xbolt.

And I forgot

I used one on a cz455, and it works great.

Also put one in my CZ 455 and definitely helped lighten it up.