Looking for reputable gunsmith in NW Washington

[VICOMB]

I have a Fierce Carbon Rage 7mm rem mag about 4 years old. Just last week I started some new load development and found that the bolt was a little sticky and wouldn't fully eject my old or new reloads. After taking down the bolt and cleaning it with Boretech and the action and chamber, I noticed the extractor didn't look right and wouldn't move in or out without a lot of pressure. Now it won't even extract the cartridge out of the chamber. I was going to try to replace the extractor myself but I rather a professional to replace it because it's a great shooting rifle and I don't want to screw it up. Any referrals will be greatly appreciated!

 

[FEENIX]

I have a Fierce Carbon Rage 7mm rem mag about 4 years old. Just last week I started some new load development and found that the bolt was a little sticky and wouldn't fully eject my old or new reloads. After taking down the bolt and cleaning it with Boretech and the action and chamber, I noticed the extractor didn't look right and wouldn't move in or out without a lot of pressure. Now it won't even extract the cartridge out of the chamber. I was going to try to replace the extractor myself but I rather a professional to replace it because it's a great shooting rifle and I don't want to screw it up. Any referrals will be greatly appreciated!

I do not know his workload but try @Elk Hunter 338 - https://www.laneprecisionrifles.com/. He is also a Site Sponsor and as good as they come.

I'm sorry, I know you said NW WA, but I'm just trying to get you to a reputable GS in the NW.

Ed