Load info for 22 Creedmoor?

[Deputy819]

70,000PSI......

Just a tad high for the Creedmoors. Nice!

 

[Deputy819]

If you have or can find 7828SSC, it works very well in my 22-250AI's using the 80's, and it gave me more speed than H4350, 4831 and a couple of others. Otherwise as others have noted, the 22/250AI load data works great for the 22CM. As always, start 5-10% below and work up. YMMV

Thank you, Sir! I'm restricted to the powder (H4350) that my neighbor dropped off, unfortunately. BUT, if I decide to get a 22 Creedmoor of my own I'll have this thread to refer to.

 

[DMP25-06]

I have had good results with H4350, Staball6.5, R26 and H4831sc and 85.5 gr Berger's. The load i have settled on is with H4831sc and the 85.5's
Here is some info from Peterson:

https://www.petersoncartridge.com/media/1367/22-creedmoor-press-release.pdf

Great information from Peterson Cartridge Co.
Thank You for posting the link .

DMP25-06