NightForce doesn't make 35mm rings BTW & Seekins didn't at the original time of this post last year,....however Hawkins now seems to manufacture the product we needed last year....
Leupold Mark5HD Rings
- Thread starter samson
- Start date
Help Support Long Range Hunting Forum
Ranger Rick
Well-Known Member
Have a good day fellas!
Awesome setup
. I sure wish I could have found Hawkins 35mm rings last year when I was shopping
EricRF
Well-Known Member
- Joined
- Feb 6, 2018
- Messages
- 65
Are those low rings? I know Hawkins lows are the standard .885, but that looks like a pretty healthy gap between the scope and barrel.
ChrisAU
Well-Known Member
- Joined
- Jan 23, 2018
- Messages
- 750
Yes those are lows. The scope body is very close to the rail. The 35mm tube doesn't make it easy to mount it low. I think I could have gotten it a tad lower using Warne Mountain Tech lows on the factory bases but the height it is now is fine with me.
These are the lowest rings at 0.82" they may be too close for clearance of the center turret housing to rail clearance, I don't know.
www.tpsproducts.com
TSR 35mm S-Low 7075 Aluminum
TSR SL (Super-Low) Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap,
www.tpsproducts.com
Rich Coyle
Well-Known Member
I use Talley light weight rings on my mk v six lug with Pendleton stock. Without rings and scope it weighs 5.5 pounds. Scope and rings weigh 24 ounces.
