BMF
Well-Known Member
Good deal,
Just make sure you don't leave any shavings or residue in your die.
Just make sure you don't leave any shavings or residue in your die.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Hard bolt closing
- Thread starter MAHMOODB
- Start date
Help Support Long Range Hunting Forum
snowpro440
Well-Known Member
Try a piece of resized brass to see if your bolt will close fairly easy then if that works adjust seating depth.
BMF
Well-Known Member
Where's. s.a ?
I was having a similar issue with my 7mm rem mag. Part of my problem was that some of the brass was fired in a different gun. I tried everything I could think of but the last thing I did solved the problem.
I annealed a couple of brass then re sized them. It was amazing the results. The brass re sized to the proper sizing and held the proper sizing. The problem is your brass becomes hard and resists the resizing process and springs back to the size it was before. After being annealed the brass is softer and doesn't spring back as much.
Try a couple of brass i am sure you will see some positive results. I am now a believer in annealing brass.
I annealed a couple of brass then re sized them. It was amazing the results. The brass re sized to the proper sizing and held the proper sizing. The problem is your brass becomes hard and resists the resizing process and springs back to the size it was before. After being annealed the brass is softer and doesn't spring back as much.
Try a couple of brass i am sure you will see some positive results. I am now a believer in annealing brass.
