Hammer 109 gr absolute

[Hard rock]

. Thanks Steve I have tried H4350 and pressured out with bolt lift at 58 grs , then changed too N560 up too 63 grs the powder is cut too where the case fill will max out at around 65 grs or so with out too heavy of compressed load . Thanks for your input trying too figure out what others are getting vel wise with that bullet from the 6.5 prc
[/QUOTE. I went back too my range today and did another ladder test on the 6.5prc with N560 ,but changed too standard LR CCI 200 primers with the advice from Steve of Hammer bullets . Changing primers and moving up in charge 2 grs too 65 grs gave me a 136 fps vel gain with no ejector marks slight bolt lift with a new vel from 3592 fps too 3728 fps ,the test went like this 62 grs 3517 62.5 grs 3555 fps 63grs 3576 fps 63.5 grs 3616 fps 64grs 3649 fps 64.5 grs3683 fps and 65 grs at3728 fps . Not bad I can push it further but primer pockets are still tight 6 shots out of 7 measured 1.125 and 6 shots. . 780 with 3 of those in the same hole of bench with a bull bag no rear rest .Steve thank you for your time and advice from hammerbullets

 

[RockyMtnMT]

Tossed that one out to the left!

 

[Hard rock]

Tossed that one out to the left!

The afternoon noon sun in my eyes the scope is a meopta 3x18 the reticle is the diachoric 4d covers 1moa at 100 yds a cross hair would allow a finer hold this bullet is extremely accurate with the additional .75 twist recommended thats seven diff powder charges with .004 bullet runout I need too change too a compt seater the seat die I'm using is a rcbs universal mic seat die.I might be able too get them all in less than one hole next time, lol these 72 year old 20 20 eyes still work pretty good ,thanks for a great bullet and the help .

 

[GLTaylor]

Hard Rock,
When you finish please post all your load data (all powders/primers, etc) so I can post for others in the Spreadsheets
G