-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
First shot at annealing.
- Thread starter Nomad8961
- Start date
Help Support Long Range Hunting Forum
If you not getting the neck, shoulder to a red state. You are doing something wrong. Get Tempilaq pen temp rate of 650 drg's ratted. You can get them a Amazon.
That full state of red color means yer burning out at least some amount of the zinc and changing the overall metallurgy.
I found the test done by Amp quite interesting, as far as burning off Zinc in Brass.
www.ampannealing.com
" 3. Dezincification of brass can occur because of chemical attack, but heating brass, even to high annealing temperatures cannot cause dezincification unless chemicals are present. The zinc content of the alloy cannot burn or melt out up until boiling point (Appendix 1 - 1.6)."
Food for thought, as it was Lab testing and not personal opinion. Read it and arrive at your own conclusion.
Induction Annealing Brass | Our Research | AMP
View the latest articles from AMP Annealing. Get tips and tricks from our R&D. Here we upload articles to provide your the best possible information on innovations in the annealing process.
www.ampannealing.com
" 3. Dezincification of brass can occur because of chemical attack, but heating brass, even to high annealing temperatures cannot cause dezincification unless chemicals are present. The zinc content of the alloy cannot burn or melt out up until boiling point (Appendix 1 - 1.6)."
Food for thought, as it was Lab testing and not personal opinion. Read it and arrive at your own conclusion.
What's both the loading/shooting consistent accuracy and longevity of such brass cooking?
