• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Easy to make 22 Creedmor from 308

By the time I paid shipping and tax these 300 pieces of 22-250 Norma cost me $350
and I challenge all of you to try and find any 22 250 brass out there right now ...

they are unicorns
I don't know what happened ?? why the manufacturers all halted production
there are plenty of rifles rolling off the line worldwide with this classic cartridge.

it's ridiculous ....thus ...my quick decision to build a 22 Creed even though my 22250 AI won't be in my hands till next week....
 

Attachments

  • 20240602_130644[1].jpg
    20240602_130644[1].jpg
    231.4 KB · Views: 49
cohunt said:
If you are shooting 55gr and under then the 22-250 is great, but if you want to go up to 70-80 grain heavies the 22cm is your huckleberry-----

sad, do you have to ream the modified 308 case necks? Seems like they would be pretty thick and might form donuts if not reaming
Click to expand...
55 and under I'll use my 223AI to keep it economical .....less powder is the new norm
 
Have a good day guys , I'm headed to my brothers shop to fabricate a pedestal action and barrel vise.... ordered my Short Action customs action wrench .. No go and go gauges for my 22 creed build , as well as doing the barrel swap myself on my Tikka CTR 6.5 ....the local smith has taken the last 3 days off ...I'm tired of waiting on others to do a job I can do better ... Ill just buy the damned tool and make a few myself..
 
Shotsafterdark said:
Been busy ..
No donuts whatsoever ,,,kept it lubed with lanolin and graphite through the process
ended up at .255" to .257" average ...set the cutter to finish at .250"
thickness averaged .015" to .018"
Seat the bullet and you land on the money !

Running batches through trimmer takes no time at all ...
I have an abundance of 308 Brass , so it's a warm and fuzzy feeling knowing
I have my 6.5, 22 Creed as well as 308 all covered with availability ...

Time at the bench is therapy to me so I don't find myself lamenting about it
turn on the talk radio and just let it flow ....

The one gentleman mentioned he would go through all these steps etc...
6 times what I did ,,,,if you feel that's needed go for it....
I'll do it with 3 steps and done ...


Having just exhausted all resources on the internet abroad looking for 22 250 brass and found only 300 pieces of Norma for $335 I'm not exactly over joyed with the prospect of dealing with that again .....Thus I threw together this rifle on the quick and cheap to run it and balance the use ....again brass and component availability is NOT going to be taken for granted by me.....I know what the future holds.....it's NOT good..
Click to expand...
I just spent the weekend fishing with someone who works for a major ammo company. The conversations about ammo production and supply constraints in that industry were eye opening and not very reassuring as a shooter and hunter.
 
Time is money. What is your time worth? For some maybe it makes sense. The older you get you realize time is a precious commodity. You only get so much. I 'd rather be hunting, fishing or shooting than spending time at the bench.
 
Shotsafterdark said:
Because ,,,that's why .....not sure if you have noticed but the economy is in freefall
Food is quickly becoming a commodity as it's increasingly rare and out of reach
if you don't crap ....

I hunt coyotes and chucks ....I'm not wasting money punching lil holes in paper
therefore I'm not worrying about getting that last .0001" in concentricity improvement out of my ammo ....1/2 MOA works for me....

I'm staying frugal .....The money I save with time at the bench , provides more $$ to buy more superformance ......
Click to expand...


lol
 
Shotsafterdark said:
By the time I paid shipping and tax these 300 pieces of 22-250 Norma cost me $350
and I challenge all of you to try and find any 22 250 brass out there right now ...

they are unicorns
I don't know what happened ?? why the manufacturers all halted production
there are plenty of rifles rolling off the line worldwide with this classic cartridge.

it's ridiculous ....thus ...my quick decision to build a 22 Creed even though my 22250 AI won't be in my hands till next week....
Click to expand...
Sportsmansgunshop.com has them in stock. 300 pieces of Sig 22-250 for $197

Also found this: https://sportsmansreloads.com/product/federal-premium-gold-medal-brass-22-250-remington-bag-of-100/

I've never ordered from them, so I can't vouch.
 
Last edited:
Prairie Sasquatch said:
I just spent the weekend fishing with someone who works for a major ammo company. The conversations about ammo production and supply constraints in that industry were eye opening and not very reassuring as a shooter and hunter.
Click to expand...
Feel free to share
 
cohunt said:
If you are shooting 55gr and under then the 22-250 is great, but if you want to go up to 70-80 grain heavies the 22cm is your huckleberry-----

sad, do you have to ream the modified 308 case necks? Seems like they would be pretty thick and might form donuts if not reaming
Click to expand...
I have a 26" 22-250 in fast twist that I run the 75's @3,300fps, and while not as fast as my AI's or 22CM, it is no slouch either.
 
Last edited:
del2les said:
I have a 26" 22-250 in fast twist that I run the 75's in @3,300fps, and while not as fast as my AI's or 22CM, it is no slouch either.
Click to expand...
Thats plenty fast enough to get the job done ....
 

Similar threads

J
Can i make 22-250ai directly from 308 win?
Replies
12
Views
4K
tgonza
T
F
Quick, cheap and easy .308 hunting ammo
Replies
0
Views
2K
FAL Shot
F
B
possible to make 28 Nosler from 300 ultra mag brass?
Replies
1
Views
410
Dmagna
D
D
making 260 Remington brass from 308 and 243
Replies
9
Views
6K
Bart B
B
MTsmith
Need easy answer to dumb question
Replies
3
Views
1K
cowboy
C

Recent Posts

Top