Diy Shooting bench

[sticknstringer22]

Put this together today!! We will see how it works. It's Solid for sure, gonna take a couple guys to move it.

 

[akdad]

That little dude is ready to use it!!!

 

[liber]

Thanks for having your boy wear jeans with a belt, just like a real man. Way better than a tinker bell outfit...LOL

Nice shooting bench, does it break down for transport? Looks like it will fit in your truck, you could get one of those truck jib cranes that mount inside the rear of the bed. You could swing that out and lift it and swing it back in easily.

 

[sticknstringer22]

Ya lil man helped build it, he's always ready to put on Jeans and boots. This will fit in the truck, gonna be stationary at the farm once I pick a spot to drop it. Got several ideas where it should see 700 plus yard shots. A couple that reach a 1000 barely but those require a sidebyside to get to most likely. Gonna let it sit in the weather then either stain or paint it. Does not fold or detach. All 1 solid piece.

 

[ARlife4me]

put wheels on the front legs as when you tip it the wheels will roll. you can either use 3 sided wedge with a handle on the back to tilt it and push/or pull. this way with the 3-sided wedge you can remove it as not to trip over it in the middle leg. are you going to leave it in place where you shoot at or bring it back with you when you leave each time? use either light weight ramps or 2x's or 4x's (2 pieces) as turn the table over and push it into the bed. the size is more of the issue on moving it than the weight, unless you have an issue with your back and/or neck? my neck issue keeps me from loading 18.4x42's tractor tires by myself (tire only, no wheel). i have some 50's that aren't much fun either!

great work on the bench as i'm sure he'll have fun using it also for years to come!