Why toy with it? Just do it. Assuming you know the safety parameters you need to stay within
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
DIY Carbon fiber barrel?
- Thread starter Mram10us
- Start date
Help Support Long Range Hunting Forum
Not exactly. Need to do more research. Rifle is currently a 6.5-06 with a fluted barrel that is .875 at the end. Looking at other similar cartridges with ultralight barrels, it could stand to lose a few ozWhy toy with it? Just do it. Assuming you know the safety parameters you need to stay within
Blancoalex
Well-Known Member
Mram10us, I have extra Hart 6mm-14 twist that is chambered in standard 6mm Remington. It came off Rem 700.
Be happy to donate to you for a Varmint rifle test barrel.
Be happy to donate to you for a Varmint rifle test barrel.
Send it over with a liability form
do you know the performance of the barrel?
Blancoalex
Well-Known Member
No for you to try making a fast varmint rig for yourself and learning.
I was going to say if you knew the performance we could use it for a test. I'll pm you
Blancoalex
Well-Known Member
I need to find barrel box to get up to you. It only had around 400 rounds down barrel and not pushed hard. Barrel still very usable.
Pm sent. Thanks BA
Well to me it looks like going off a lilja #1 profile mine could definitely lose some weight by turning it down to .625 till about 6" from the bolt face.
