snox801
Well-Known Member
Sorry I never saw it written. Just discussed in person. I may have seen it written but never paid attention to it. I learned about it when I called a place that made specific line for ti action. Guy was very informative.
Defiance Ti-X
- Thread starter 2buffalo
- Start date
Help Support Long Range Hunting Forum
snox801
Well-Known Member
Phil what TI actions did you run? Just curious now. As we all know not all ss is the same and I know not all titanium is the same.
I am also curious about the difference in manufactures different action.
I am also curious about the difference in manufactures different action.
snox801
Well-Known Member
I believe one of pierce engineering's employees is on this site maybe he could chime in. With as many as they pump out he would have a good idea if it's a common complaint.
akmtnhnt
Well-Known Member
Good point, rather it not be in the action.
I work for Pierce Engineering, we don't really get complaints with people using our actions. I tell anyone who's concerned that stainless/steel actions will typically handle higher pressures before the bolt gets hard to open. Keeping your lugs lubed and having the full action DLC'd helps. However, you have to be running above SAAMI max pressure to see any issues. I tell people who are worried about it to just get a stainless action. If you run factory ammo or load within SAAMI max, you'll never have an issue.
We have several high end rifle builders who love our actions and they push them hard. I personally haven't tested the same barrel on a stainless action and a Ti action, but it's something I've planned to do. Run both up to pressure using the same barrel, brass, bullets, powder, etc and see where they top out with heavy bolt lift. Heavy bolt lift is WELL north of SAAMI pressures just so everyone is aware.
We have several high end rifle builders who love our actions and they push them hard. I personally haven't tested the same barrel on a stainless action and a Ti action, but it's something I've planned to do. Run both up to pressure using the same barrel, brass, bullets, powder, etc and see where they top out with heavy bolt lift. Heavy bolt lift is WELL north of SAAMI pressures just so everyone is aware.
Looking forward to your results, thanks for the time and trouble.
