I'm with you.....a lot of wizz different for me. I will never speak ill of others hunting style or technique or method if it is moral and legal. May not be what I do or want to do, and I wont reduce anyone elses opportunity to hunt and enjoy their outdoors. Nothing worse than one hunter bashing or being against another legal hunter over feelings. We all have to fight off the majority of non and anti hunters on our own let alone bashing each other.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Cost of a Custom Rifle with Glass
- Thread starter Coyote Shadow Tracker
- Start date
Help Support Long Range Hunting Forum
Meanwhile i got a 338 lapua ai that im in hard cost 4500$ cant give it away lol
Put a good brake on it, that will help sell it.
memtb
Well-Known Member
If it were under 10# (scoped,loaded, slung) "AND" I were looking…..I'd be seriously interested! And……you could keep the brake! memtb
Whats better then a terminator brake? Ive shot them all for most part. Ti pro is so close its almost a knock off
Ya long story but had guy want that many turns out full of crap
memtb
Well-Known Member
Very sad and very true!
Makes me think about the Mona Lisa……priceless to many, I wouldn't want it in my house! memtb
First of all I am not a precision Marksman, I am an older guy, and enjoy hunting and shooting in general, this was my experience during the pandemic. Although I have always desired higher end rifles, when I was younger I could not justify the cost with putting two kids through college and the typical costs of raising a family. As I got older, decided do the things now, or they will never get done. When I was working corporate I helped out a division in South Africa, the gents there invited me to go on a hunt, at time as much as I wanted to go I could not find and purchase a suitable rifle.
Now many years later that hunt is on my bucket list, I decided to purchase a 375 caliber rifle in either 375 H & H or 375 Ruger. To my dismay, there were none to be found for purchase that I had thought would be suitable. As a result I did go the custom route. As I explored the options I did reach out to Weatherby and others, and was told the timing of a rifle build and if they could do it at all, most custom rile companies were only doing smaller calibers.
I did find a barrel manufacturer named Shaw, and they did build rifles. I had a custom 375 Ruger built, it is on a Savage action but does not have the barrel nut, it has stainless steel action, the action is CIP length to allow for longer bullets, it has a DBM, it has bedded H & S precision stock. The fit and finish of the rifle was very good, the barrel is stainless, 26" long, hand lapped. Besides putting on a 20 MOA rail, Vortex matched 34mm rings I did swap out the spring of the accutrigger set at 2.4lbs, which I kept instead of the timney I had purchased(timney did not function properly with the safety). It is topped with a Vortex strike eagle 5 x 25 x56 FFP. Which I used during break-in and sight-in, initial MOA using Buffalo bore ammo was about 0.75 it will get tighter. I still have to install the arca rail for use on a tripod and the adjustable cheek rest. Other items purchased, big stainless brake (can post the vendor nice guy) and an Indian creek blast shield that is over my brake, deflects sound and concussion away from me and other shooters on the sides of me. The recoil with the indian creak device on goes directly into my shoulder, and it looks like a mini suppressor. I was able to obtain the rifle and components purchased, for about, $1900.00, without glass. (I did get a deal on the build of about $500.00 off for the rifle build, during the pandemic) I went less on the glass about $600.00 but for my purposes it will work, I did purchase a light weight Razor LHT I may swap but don't believe it will be necessary. The build took about 9 months to get to me but I am very ☺ happy with the experience. As I will use this rifle for 3 specific hunts probably more as my health permits. I am very pleased with the process and really happy with the rifle. The only thing I would have done differently is have the barrel fluted for weight reduction, have them install another trigger and install the adjustable cheek rest. If anyone is interested in the actual cost breakdown I could find my receipts. The full weight with scope without the adjustable cheek-rest and ARCA rail is under 11lbs.
Last edited:
Rick Richard
Well-Known Member
I have had more than a few custom rifles built…more than some, but I am sure not as many as others. All them were built by top tier smiths and all of them did not disappoint. Cheap? NO, but worth every penny. The way I look at it is "my money and I will spend it like I want". Good day and god bless.
Amen......It was a long wait but just got the good news from Dallas mine will finish up this week. I feel like a kid at Christmas
Ive heard the argument of f people saying i dont need a custom rifle when they can buy christensen or a fierce ect. Most have never shot a full custom gun to know the difference. I wont touch a factory gun of any brand anymore for doing load work unless owner is open to opening his check book. Too many issues in past.
Rick Richard
Well-Known Member
Nice. He's the man. Post some pics when you get it.Amen......It was a long wait but just got the good news from Dallas mine will finish up this week. I feel like a kid at Christmas
