Cold hammer forged barrels pros & cons ?

[dragonxi4longrangehunting]

Alternatives to cold hammer
forged (CHF) barrels ?

ref:
"
All Sako rifles, feature match-grade
cold hammer forged barrels.
There are many advantages to cold hammer
forged (CHF) barrels: they're durable,
accurate and have excellent tolerances.
The cold hammer forging technique
changes the structure of the steel,
increasing its toughness and
making the barrel life of your rifle longer.
CHF barrels do not have to be broken in,
but instead have superb out-of-the-box
accuracy."

 

[Taylorbok]

I prefer cut rifle barrels

 

[AZShooter]

Alternatives: cut, or button. I suppose some shorter barrels can be broached.

As to hammer forged barrels:

Remington barrels must not alter the steel very much because you can see the reamer marks if you view them with a borescope. These barrels may shoot accurately but are often difficult to clean.

I once viewed a video on how Tikka barrels are hammer forged. The blank is thick and short. It is worked till it becomes much longer and narrower in diameter. The end result that I have seen has the interior surface that is smooth with no reamer marks. The few I have been around clean up easily too.

 

[MagnumManiac]

My 70's vintage Sako barrels are all cut rifled, as was THE only way GREAT barrels were made back then.
Hammer forging is much less cost than even button rifled, which is THE only reason factories are doing it…

Cheers.