Christensen arms Ridgeline

It's PO1577
My CBTO with a 25 cal insert is 2.455"
RL26? I ran a ladder @ 400y yesterday seated 110k off. Loaded some up @ 55.7gr and shot the first two groups in seating test, 80 and 90k off. Next group all three had pretty hard bolt lift. 55.4 ran 2920 on the ladder, ans today it was 2980-2990. I did have the can on this go round, but I've used this thing many times and most vo I've added was maybe 15-20fps. It's an omega 300 w/ a 6.5mm end cap.
 

Attachments

  • IMG_20200509_192035.jpg
    IMG_20200509_192035.jpg
    528.2 KB · Views: 168
Last edited:
RL26? I ran a ladder @ 400y yesterday seated 110k off. Loaded some up @ 55.7gr and shot the first two groups in seating test, 80 and 90k off. Next group all three had pretty hard bolt lift. 55.7 ran 2920 on the ladder, ans today it was 2980-2990. I did have the can on this go round, but I've used this thing many times and most vo I've added was maybe 15-20fps. It's an omega 300 w/ a 6.5mm end cap.

Yes. RL26. Mid 54 grains is where things usually end up with this combo.
 
I'm 14 and 120 lbs would a 300 win mag be too much recoil for me even with a muzzle brake and/or recoil bad?
It depends on the rifle and the brake but generally I'd say go with something a bit smaller personally. Not that you can't shoot a 300 but you will shoot a smaller caliber better guarantee. It's actually true for everyone but us guys don't like to talk about that 😂
 
What is the range like on these ridgeline rifles? I'm looking to get one in 6.5 Creedmoor or 6.5 prc and will be taking shots out to 900 yards. I just wanted to know if this rifle could suit my needs. Help would be appreciated. Thanks
 
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top