• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Cerakote color recommendations with proof carbon barrel?

A7CAF7BD-FE30-4DF4-94CB-9169D91EC223.jpeg
866CBF5D-212B-45D9-BDE5-1D94E08183B8.jpeg
7F8875B3-D95D-4ABE-8B13-7444CB5151C0.jpeg
A7CAF7BD-FE30-4DF4-94CB-9169D91EC223.jpeg


I like more of a black on metal with carbon barrels
 
Is that a rem 700 receiver??
It is an R700 action. That is the 4th build off of it now. Started life as a .308 from the factory. I bought it used about 20 years ago from a pawn shop. Turned it into a .22-250. Burned that barrel out after about 1500 hot rounds, and built a .250AI. Burnt that barrel out in about 2000 rounds and completely changed everything and built a 6.5SLR 15.5# heavy target rifle. Finally burned that barrel out in over 2300 rounds, and rebuilt about everything again to the 10.5# 6.5SLR again. Only 60ish rounds down the barrel so far, but it is going to be a tack driving Hunter.
 
Graphite black. Matches the carbon perfect. Another would be cobalt or tungsten. I'll try to get some pictures of each
 
1017180855a.jpg My hunting 65284....thru the woods gun...
The receiver is original Remington grey..most of the barrel is tungsten....muzzle is titanium.....why.....because I could...
The grip is worn off something black....on a brown with black webbing BC ultra liteweight stock....scope 6-18x40 cds.....packs lite...cant imagine it weighs 8#....but dont know...havent weighed it....
 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top