Case weight & length

[dkwellman]

2 different brands of brass. Hornady 7mm rem brass is 30 grains lighter than the Nosler brass. Length is within 2/1000 of each other with the Nosler brass being shorter. Any suggestions on how & which I should start with? Nothing long range but I want to cut holes at 100 yards.

 

[RichCoyle]

Start with the Nosler. If you do it the other way, the loads would be over pressure if you use the same load.

 

[dkwellman]

Start with the Nosler. If you do it the other way, the loads would be over pressure if you use the same load.

Thanks. Really didn't weigh brass before but it must make a noticeable difference.

 

[dkwellman]

Thanks. Really didn't weigh brass before but it must make a noticeable difference.

Up