Bang4theBuck
Well-Known Member
Don't change the channel, yet. as I am staying with the .243 class. I went with a 6mm Creedmoor, not the 6.5 creedmoor.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
CALLING ALL .243 AI SHOOTERS. I'M CONSIDERING A CALIBER SWAP ON SENDERO PLATFORM
- Thread starter Bang4theBuck
- Start date
Help Support Long Range Hunting Forum
Trangieboy
Active Member
About to convert a 26" howa creedmoor into a 243improved 30°,specifically to shoot the 225gn oops,the 115gn Bergers.
Berger's site says I'll need 3100fps to properly stabilize them from the 7.5twist barrel.
Am I going to be able to get that speed OK ?
Thanks, Mal
Berger's site says I'll need 3100fps to properly stabilize them from the 7.5twist barrel.
Am I going to be able to get that speed OK ?
Thanks, Mal
Last edited:
EddieHarren
Well-Known Member
How long is that Berger .243 225 Gr Bullet? What is the BC?
Also, why 30 degrees?
Also, why 30 degrees?
Last edited:
BallisticsGuy
Well-Known Member
It would need fins to stabilize and then I guess we could call it a lawn dart.
Legionnaire
Well-Known Member
Gotta be a typo. Probably meant 115.
Andrew Massi
Well-Known Member
Maybe, but your barrel might not like the powder required to get the velocity. If you havent ordered a barrel yet just grab a 7 twist
Trangieboy
Active Member
Sorry, 115gn pill
Stuck with the factory 7.5 twist barrel
I went 30° as its a hunting rifle and I wanted 100% feeding
Stuck with the factory 7.5 twist barrel
I went 30° as its a hunting rifle and I wanted 100% feeding
Andrew Massi
Well-Known Member
Are you converting a factory 6 creedmoor ?
Trangieboy
Active Member
Sure am
Andrew Massi
Well-Known Member
Gotcha, thought you were talking rebarrel.
Well if the 115s won't shoot theres plenty of options that will stabilize from 105-110
Bergers 109 looks Interesting and only needs a 1:8
Trangieboy
Active Member
I think those 109s are a target bullet ?
Hopefully I can get 3100 out of the 115s. People seem to get nearly 3000 pushing them with the creed.
adam32
Well-Known Member
Go with the standard 40 degree, it'll feed just fine and reamers/dies are much easier to find.
