Big Bore Brake

[Jeff Haugland]

I know this is a can of worms but here it goes.Looking to replace the factory brake on my Seekins Havic Element 300 win mag. What is considered the top end of tuning brakes. Thanks jeff~

 

[K.E.C. Darkside]

TERMINATOR.
T2, T3 OR T4.

I have the T4 on my 30/378 Tamed it down to a maybe 30-06 shooting 150gr.
For your application I would recommend
T2 or T3.
They are price's but they work.

The Ti - Pro and SS - Pro 4 and 5 port work well also.

OOOPS MY BAD.. TUNING BRAKE
DISREGARD ABOVE....

 

[Varmint Hunter]

TERMINATOR.
T2, T3 OR T4.

I have the T4 on my 30/378 Tamed it down to a maybe 30-06 shooting 150gr.
For your application I would recommend
T2 or T3.
They are price's but they work.

The Ti - Pro and SS - Pro 4 and 5 port work well also.

The OP is asking about "tuning brakes".

 

[WildBillG]

I believe he is asking what are rhe top end tuneablle brakes. I don:t know who makes tuneable brakes. So I will keep wiiet. But have read and heard they work.

 

[FEENIX]

I know this is a can of worms but here it goes.Looking to replace the factory brake on my Seekins Havic Element 300 win mag. What is considered the top end of tuning brakes. Thanks jeff~

I have EC Tuner Brake in my .338 Thor and is very effective. It is available in .30 Cal.

 

[RH300UM]

I have EC Tuner Brake in my .338 Thor and is very effective. It is available in .30 Cal.

Did you bore yours out to accept.338?

 

[FEENIX]

Did you bore yours out to accept.338?

No, Sir! I purchased it already bored for .338.

The next-gen is also available now, and if I had to do it over, I would go this route.

 

[RH300UM]

Ok
I was looking at the next Gen model for 3/4-24 threads
Thank you I'll look at this

 

[Rosebud]

Fat Bastard Gen 3, five ports, self timing.
Has top ports with set screws you remove until you don't see muzzle rise. Watching the bullet impact is a great thing.

 

[VenatusDominus]

Plus one for the EC Tuner Brake. I have one on my Ruger Precision Rifle in 6.5 PRC and it works great.

 

[skipglo]

MDT makes a nice one!

 

[MuzzleBreak]

Using the EC Tuner Brake also was shooting MOA and got it down to .3" on a calm day on my .300 WinMag. When I'm in it will shoot sub MOA and cut out recoil much better than the factory radial brake.
Disc was at 400. Shot on same day of brake install
Last pic first shot at 3 o'clock was before 1/4 moa adjustment after sighting in my scope after the rings went loose. Tuner brake does work.

Not sure how environmental conditions effect the brake though.

 

[RH300UM]

Which brake from EC?

Using the EC Tuner Brake also was shooting MOA and got it down to .3" on a calm day on my .300 WinMag. When I'm in it will shoot sub MOA and cut out recoil much better than the factory radial brake.
Disc was at 400. Shot on same day of brake install
Last pic first shot at 3 o'clock was before 1/4 moa adjustment after sighting in my scope after the rings went loose. Tuner brake does work.

Not sure how environmental conditions effect the brake though.
View attachment 631781View attachment 631780

View attachment 631783

 

[MuzzleBreak]